Ford 2003 F-150 v.4 Manual do Utilizador descarregar pdf (Página 245)

4. Latch the gearshift lever in P (Park) and leave the engine running.

5. Remove the dipstick, wiping it clean with a clean, dry lint free rag. If

necessary, refer to Identifying components in the engine compartment

in this chapter for the location of the dipstick.

6. Install the dipstick making sure it is fully seated in the filler tube.

7. Remove the dipstick and inspect the fluid level. The fluid should be in

the designated area for normal operating temperature or ambient

temperature.

Low fluid level

Do not drive the vehicle if the fluid

level is at the bottom of the dipstick

and the ambient temperature is

above 10°C (50°F).

Correct fluid level

The transmission fluid should be checked at normal operating

temperature 66°C-77°C (150°F-170°F) on a level surface. The normal

operating temperature can be reached after approximately 30 km (20

miles) of driving.

You can check the fluid without driving if the ambient temperature is

above 10°C (50°F). However, if fluid is added at this time, an overfill

condition could result when the vehicle reaches normal operating

temperature.

The transmission fluid should be in

this range if at normal operating

temperature (66°C-77°C

[150°F-170°F]).

’

ADD COLD HOT DO NOT ADD

’

ADD COLD HOT DO NOT ADD

Maintenance and Specifications

245

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 279 280

Sem comentários

Ford 2003 F-150 v.4 Manual do Utilizador Página 245