Ford 2003 F-150 v.4 Manual do Utilizador descarregar pdf (Página 53)

Replacing high-mount brake and cargo lamp bulbs

Make sure the headlamp control is

in the OFF position.

1. Remove the two screws and move

the lamp assembly away from the

vehicle to expose the bulb sockets.

2. Remove the bulb socket by

rotating counterclockwise and

pulling it out of the lamp assembly.

3. Pull the bulb straight out of the

socket and push in the new bulb.

Install the new bulbs in reverse

order.

Replacing foglamp bulbs (if equipped)

1. Make sure the headlamp control

is in the OFF position.

2. Remove the bulb socket from the

foglamp by turning

counterclockwise.

3. Disconnect the electrical connector from the foglamp bulb.

Install the new bulb in reverse order.

Replacing signal mirror lamp bulbs (if equipped)

For bulb replacement, see a dealer or qualified technician.

Replacing license plate lamp bulbs

The license plate bulbs are located

behind the rear bumper. To change

the license plate lamp bulbs:

1. Reach behind the rear bumper to

locate the bulb.

2. Twist the bulb socket

counterclockwise and carefully pull

to remove it from the lamp

assembly.

Lights

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 279 280

Sem comentários

Ford 2003 F-150 v.4 Manual do Utilizador Página 53