Ford 2003 F-150 v.4 Manual do Utilizador descarregar pdf (Página 258)

axle assembly has been submerged in water. The axle lubricant should

be changed any time the rear axle has been submerged in water.

Service refill capacity is determined by filling the axle to 6-14 mm

(1/4-9/16 inch) below the bottom of the filler hole with the vehicle on a

level surface.

Add 118 ml (4 oz.) of Additive Friction Modifier XL-3 or equivalent

meeting Ford specification EST-M2C118–A, for complete fill of 8.8 inch

and 9.75 inch Traction-Lok axles.

Service refill capacity is determined by filling the axle to the bottom of

the filler hole with the vehicle on a level surface.

For 10.25 inch Traction-Lok axles, use 3.1L (6.5 pints) of Motorcraft SAE

75W-140 Synthetic Rear Axle Lubricant and 236 ml (8 oz.) of Additive

Friction Modifier XL-3 or equivalent meeting Ford Specification

EST-M2C118-A.

Use of synthetic or synthetic blend motor oil is not mandatory. Engine

oil need only meet the requirements of Ford specification

WSS-M2C153–H and the API Certification mark.

LUBRICANT SPECIFICATIONS

Item

Ford part name

or equivalent

Ford part

number

Ford

specification

Front axle (4X4)

Motorcraft SAE

75W-90 Premium

4x4 Front Axle

Lubricant

XY-75W90-TQL WSP-M2C201-A

Rear axle

Motorcraft SAE

75W-140 High

Performance

Synthetic Rear

Axle Lube

XY-75W140–QL WSL-M2C192-A

Brake fluid and

clutch fluid

Motorcraft High

Performance

DOT 3 Motor

Vehicle Brake

Fluid

PM-1 ESA-M6C25-A

and DOT 3

Maintenance and Specifications

258

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 279 280

Comentários a estes Manuais

Sem comentários

Ford 2003 F-150 v.4 Manual do Utilizador Página 258

Comentários a estes Manuais

Manuais e produtos relacionados com Automóveis Ford 2003 F-150 v.4