Ford 2009 F-550 v.1 Manual do Utilizador

Introduction 4Instrument Cluster 14Warning lights and chimes 14Gauges 21Entertainment Systems 26AM/FM stereo 26AM/FM stereo with CD 28AM/FM stereo wit

Notice to owners of diesel-powered vehiclesRead the 6.0 and 6.4 Liter Power Stroke Direct Injection Turbo DieselOwner’s Guide Supplement for informati

4. Remove the bulb assembly,sidemarker or park/turn by turningit counterclockwise. (Top view ofassembly shown.)5. Pull the old bulb out from thesocket

Replacing cargo lamp and high-mount brakelamp bulbs1. Make sure the headlamps are off.2. Remove the two screws and lampassembly from vehicle as wiring

Replacing license plate lamp bulbsThe license plate bulbs are locatedbehind the rear bumper. To changethe license plate lamp bulbs:1. Reach behind the

MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the

TILT STEERING WHEEL1. Pull and hold the steering wheelrelease control toward you.2. Move the steering up or downuntil you find the desired location.3.

ILLUMINATED VISOR MIRROR (IF EQUIPPED)Lift the mirror cover to turn on thevisor mirror lamp.OVERHEAD CONSOLE (IF EQUIPPED)The appearance of your vehic

CENTER CONSOLE (IF EQUIPPED)Your vehicle may be equipped with a variety of console features. Theseinclude:• Utility compartment withcassette/CD holder

Under-seat storageFlip the rear seat cushion up toaccess the rear under-seat storagearea. See Seating in the Seatingand safety restraints chapter form

fuse may have blown. Refer to Fuses and relays in the RoadsideEmergencies chapter for information on checking and replacing fuses.To have full capacit

Rear Window Buffeting: When one or both of the rear windows areopen, the vehicle may demonstrate a wind throb or buffeting noise; thisnoise can be all

If your vehicle is equipped with theFord Ambulance PreparationPackage, it will be indicated on theSafety Compliance CertificationLabel. The label is l

If your vehicle is equipped with apower rear slide window, the switchis located on the instrument panelbehind the right-hand side of thesteering wheel

With microphoneThe mirror will automatically return to the normal state whenever thevehicle is placed in R (Reverse) to ensure a bright clear view whe

Heated outside mirrors (if equipped)The main mirror glass and lowerconvex spotter mirror are heated toremove ice, mist and fog. To activatethe heated

Powerfold mirror positions, from left to right: Position 1, Position 2,Position 3The powerfold mirrors may be folded forward/rearward manually to anyo

Telescoping mirrors (if equipped)The telescoping feature allows themirror to extend approximately2.75 inches (70 mm). This feature isespecially useful

Mirror mounted side turn signal indicator (if equipped)When the vehicle turn signals areactivated, the outer portion of themirror housing will blink a

The accelerator and brake pedal positions are saved when doing amemory set function and can be recalled along with the vehiclepersonality features whe

• If the vehicle speed increases above the set speed on a downhill, youmay want to apply the brakes to reduce the speed.• If the vehicle speed decreas

Reducing speed while using speed controlThere are two ways to reduce a setspeed:• Press and hold the SET - controluntil you get to the desiredspeed, t

Audio control featuresPress MEDIA to select:• AM, FM1, FM2• CD (if equipped)• DVD (if equipped)• SAT1, SAT2 or SAT3 (SatelliteRadio mode, if equipped)

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag

Navigation system hands freecontrol features (if equipped)Press and hold VOICE briefly untilthe voiceicon appears on theNavigation display to use the

For further information on the Navigation system/SYNC system, refer tothe Navigation System and SYNC supplements.UPFITTER CONTROLS (IF EQUIPPED)Your v

There will also be one power leadfor each switch found as a blunt-cutand sealed wire located below theinstrument panel and to the left ofthe steering

and release the control again to fully open. To stop the one-touch openfeature, press either theor control again.WARNING: When closing the moon roof,

detect an object, signaling the door to stop and reverse, does not meetcurrent U.S. federal safety standards. For more information, contactHomeLink威 a

4. At the garage door opener receiver (motor-head unit) in the garage,locate the “learn” or “smart” button (usually near where the hangingantenna wire

Operating the HomeLink姞 Wireless Control SystemTo operate, simply press and releasethe appropriate HomeLink威 button.Activation will now occur for thet

STANDARD MESSAGE CENTER (IF EQUIPPED)With the ignition in the on position,the message center, located on yourinstrument cluster, displays textmessages

Distance to empty (DTE)Selecting this function from theINFO MENU estimatesapproximately how far you can drivewith the fuel remaining in your tankunder

Setup menuPress and hold the SELECT/RESETcontrol switch to get into theSETUP MENU sequence from theINFO MENU for the followingdisplays:• Units (Englis

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleasePanic Alarm Engine Oi

System checkPress and hold the SELECT/RESET control switch to select SYSTEMCHECK when HOLD RESET FOR SYSTEM CHECK is displayed in themessage center. S

This acts as a reminder that these warning conditions still exist withinthe vehicle.Warning display StatusPark brake engaged Warning returns after 10

Warning display StatusCheck air filter (diesel engineonly)Drain water separator (dieselengine only)Stop safely now (diesel engineonly)Engine warming p

REAR RIGHT DOOR AJAR — Displayed when the rear right door isnot completely closed.XXX MILES TO E FUEL LEVEL LOW — Displayed as an earlyreminder of a l

DRAIN WATER SEPARATOR (Diesel engine only) — Displayedwhen the water separator has reached a predetermined capacity andneeds to be drained. Refer to y

to clean the DPF. This will continue to be displayed until an adequatedrive cycle is completed. This message is NORMAL. Note:Power-Take-Off (PTO) and/

OPTIONAL MESSAGE CENTER (IF EQUIPPED)With the ignition in the on position,the message center, located on yourinstrument cluster, displaysimportant veh

Info menuThis control displays the followingcontrol displays:• Trip odometer A or B• Engine hour meter/odometer (ifequipped)• Distance to Empty• Avera

Average fuel economy (AFE)Select this function from the INFOmenu to display your average fueleconomy in miles/gallon orliters/100 km.If you calculate

Setup menuPress this control for the followingdisplays:• System Check• Units (English/Metric)• Autolamp timer presets (ifequipped)• Autolock On/Off (i

WARNING LIGHTS AND CHIMESVehicles equipped with a manual transmissionVehicles equipped with an automatic transmission2009 F-250/350/450/550 (f23)Owner

5. AIR FILTER (Diesel engine only)6. DOOR AJAR7. BRAKE SYSTEM8. TBC GAIN = XX.XNO TRAILER (if equipped and no trailer connected)9. TBC GAIN = XX.XOUTP

The compass reading may be affected when you drive near largebuildings, bridges, power lines and powerful broadcast antenna. Magneticor metallic objec

Perform compass calibration in an open area free from steel structuresand high voltage lines. For optimum calibration, turn off all electricalaccessor

The message center will display the last selected feature if there are nomore warning messages. This allows you to use the full functionality ofthe me

Warning display StatusCheck air filter (diesel engineonly)Drain water separator (dieselengine only)Stop safely now (diesel engineonly)Engine warming p

REAR RIGHT DOOR AJAR — Displayed when the rear right door isnot completely closed.FUEL LEVEL LOW — Displayed as an early reminder of a low fuelconditi

DRAIN WATER SEPARATOR (Diesel engine only) — Displayedwhen the water separator has reached a predetermined capacity andneeds to be drained. Refer to y

20 minutes to clean the DPF. This message will continue to be displayeduntil an adequate drive cycle is completed. This message is NORMAL.Note: Power-

TAILGATE LOCKYour vehicle may be equipped with atailgate lock designed to helpprevent theft of the tailgate.• Insert ignition key and turn to theright

4. Lower the tailgate.5. Using a screwdriver, gently prythe spring clip (on each connector)past the head of the support screw.Disconnect cable.6. Disc

Harley-Davidson vehiclesWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A war

• Always use grab handle when stepping up and down.• Step not intended for bare-footed use.• Keep step clean from contamination before use (e.g. snow,

2. Open the latches to release thepanels.3. Rotate the panels toward thetailgate.Repeat Steps 1–3 for the other side of the bed extender.4. Connect th

5. Ensure the latch rod is insertedinto the tailgate hole and the lockingpins on both sides are engaged intotheir holes in the pick-up box.6. Reverse

KEYSThe key operates all locks on your vehicle. You should always carry asecond key with you in a safe place in case you require it in anemergency.If

Autolock feature (if equipped)The autolock feature will lock all the doors when:• all the doors are closed,• the ignition is in the on position,• you

5. Turn the ignition back to the on position. The horn will chirp one timeto confirm programming mode has been entered and is active.6. To enable/disa

• using a keypad procedure (if equipped)Note: The autounlock feature can be activated/deactivatedindependently of the autolock feature.Power door lock

CHILDPROOF DOOR LOCKS (IF EQUIPPED)• When these locks are set, therear doors cannot be opened fromthe inside.• The rear doors can be openedfrom the ou

Your vehicle is equipped with a remote entry system which allows you to:• unlock the vehicle doors withouta key.• lock all the vehicle doors withouta

2. Press and release again within three seconds to confirm that allthe doors are closed and locked. Note: The doors will lock again, thehorn will chir

chapter. If the light is blinking, engine misfire is occurring which coulddamage your catalytic converter. Drive in a moderate fashion (avoidheavy acc

Deactivating the memory featureTo deactivate this feature:1. Press and hold either memory 1 button or memory 2 button for fiveseconds. A tone will be

Replacing lost remote entry transmittersIf you would like to have your remote entry transmitter reprogrammedbecause you lost one, or would like to buy

Perimeter lamps illuminated entryWith the Remote Keyless Entry system, the following items willilluminate when thecontrol on the transmitter is presse

6. Press the power door unlock control twice within 5 seconds.Note: The horn will chirp once to indicate the perimeter lighting featurehas been deacti

Programming a personal entry code and keypad association tomemory seats, mirrors and pedalsTo create your own personal entry code:1. Enter the factory

The anti-scan feature will turn off after:• one minute of keypad inactivity.• pressing thecontrol on the remote entry transmitter.• the ignition is tu

Anti-theft indicatorThe anti-theft indicator is located in the instrument cluster.Vehicles equipped with theSecuriLock™ Passive Anti-theftsystem behav

Programming spare keysA maximum of eight keys can be coded to your vehicle. OnlySecuriLock™ keys can be used. To program a coded key yourself, youwill

If not successful, the new coded key(s) will not start the vehicle’s engineand the theft indicator will flash on and off and you may repeat Steps 1thr

SEATINGWARNING: Reclining the seatback can cause an occupant toslide under the seat’s safety belt, resulting in severe personalinjuries in the event o

Airbag readiness: If this light failsto illuminate when ignition is turnedto on, continues to flash or remainson, have the system servicedimmediately

Full bench seat (if equipped)• Lift the release bar to move theseat forward or backward. Ensurethat the seat is relatched intoplace.• Pull up on the l

40/20/40 front seat armrest and console (if equipped)To release the armrest, pull forwardon the strap and pull the armrestdown.To gain access to the s

Captain’s chair (if equipped)• Lift the bar to move the seatforward or rearward. Make surethat the seat is relatched intoplace.• To recline the seatba

Press front to raise or lower thefront portion of the seat cushion.Press rear to raise or lower the rearportion of the seat cushion.Press the control

WARNING: Persons who are unable to feel pain to the skinbecause of advanced age, chronic illness, diabetes, spinal cordinjury, medication, alcohol use

A position can be recalled:• in any gearshift position if the ignition is not in the on position.• only in P (Park) or N (Neutral) if the ignition is

Push control to lower head restraint.WARNING: To minimize the risk of neck injury in the event of acrash, the driver and passenger occupants should no

To flip the seat cushion up, pullup on the lever located on the sideof the seat cushion to rotate thecushion up until it locks into avertical storage

To gain access to the 60/40 loadfloor, store the cushion in theupright locked position. Pull up onthe straps located at the sides of theload floor, an

WARNING: Each seating position in your vehicle has a specificsafety belt assembly which is made up of one buckle and onetongue that are designed to be

Powertrain malfunction/Reducedpower/Electronic throttlecontrol (RTT): Displays when theengine has defaulted to a“limp-home” operation or when atransmi

2. To unfasten, push the releasebutton and remove the tongue fromthe buckle.Vehicle sensitive modeCombination lap and shoulder belts in normal retract

How to use the automatic locking mode• Buckle the combination lap andshoulder belt.• Grasp the shoulder portion andpull downward until the entirebelt

WARNING: BELT AND RETRACTOR ASSEMBLY MUST BEREPLACED if the safety belt assembly “automatic lockingretractor” feature or any other safety belt functio

WARNING: Position the safety belt height adjusters so that thebelt rests across the middle of your shoulder. Failure to adjustthe safety belt properly

How to fasten the cinch tongue(Regular cab center seating position and Super Cab/Crew Cab rearcenter seating positions)1. Pull the combination lap and

Insert the tongue into the correctbuckle (the buckle closest to thedirection the tongue is comingfrom). To lengthen the belt, turn thetongue at a righ

Conditions of operationIf... Then...The driver’s safety belt is notbuckled before the ignitionswitch is turned to the onposition...The safety belt war

The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data):Reasons given... Consider...“Crashes are ra

Reasons given... Consider...“I have an airbag” Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate

WARNING: While the design allows you to deactivate yourBelt-Minder威, this system is designed to improve your chances ofbeing safely belted and survivi

Door ajar (RTT): Displays whenthe ignition is in the on position andany door is open.Transmission Tow/Haul Feature(automatic transmission) (ifequipped

Use only extensions manufactured by the same supplier as the safetybelt. Manufacturer identification is located at the end of the webbing onthe label.

WARNING: When possible, all children 12 years old and undershould be properly restrained in a rear seating position.WARNING: The National Highway Traf

WARNING: Removing the blocker beam without installing snowplow attachment hardware may effect airbag deployment in acrash. Do not operate the truck un

How does the airbag supplemental restraint system work?The airbag SRS is designed toactivate when the vehicle sustainssufficient longitudinal decelera

WARNING: If the air bag has deployed, the air bag will notfunction again and must be replaced immediately. If the airbag is not replaced, the unrepair

The S.O.S. Post Crash Alert can be turned off when any one of thefollowing actions are taken by the driver or any other person:• pressing the hazard c

WARNING: If the light fails to illuminate when the passenger airbag switch is in the OFF position and the ignition switch is inON, have the passenger

WARNING: The safety belts for the driver and right frontpassenger seating positions have been specifically designed tofunction together with the airba

NHTSA deactivation criteria (excluding Canada)1. Infant. An infant (less than 1 year old) must ride in the front seatbecause:• the vehicle has no rear

Transport Canada deactivation criteria (Canada Only)1. Infant: An infant (less than 1 year old) must ride in the front seatbecause:• my vehicle has no

Locks and Security 153Keys 153Locks 153Anti-theft system 165Seating and Safety Restraints 169Seating 169Safety restraints 178Airbags 190Child restrain

If your vehicle is equipped with a diesel engine, it has some uniquewarning lights; refer to Instrument Cluster in your 6.0 and 6.4 LiterPower Stroke

SAFETY RESTRAINTS FOR CHILDRENSee the following sections for directions on how to properly use safetyrestraints for children. Also see Airbag suppleme

Recommendations for Safety Restraints for ChildrenChild size, height, weight, or ageRecommendedrestraint typeInfants ortoddlersChildren weighing 40 lb

Recommendations for attaching child safety restraints for childrenNote: This vehicle is not equipped with LATCH lower anchors.RestraintTypeChildWeight

WARNING: Never let a passenger hold a child on his or her lapwhile the vehicle is moving. The passenger cannot protect thechild from injury in a colli

restrained properly, then restrain the child in the child safety seat orwith the belt-positioning booster. Remember that child seats andbelt-positioni

When installing a child safety seat with combination lap/shoulder belts:• Use the correct safety belt buckle for that seating position.• Insert the be

WARNING: Rear facing child seats should NEVER be placed inthe front seats unless the passenger airbag switch is turned off.2. Pull down on the shoulde

5. To put the retractor in theautomatic locking mode, grasp theshoulder portion of the belt and pulldownward until all of the belt ispulled out.6. All

9. Attach the tether strap (if thechild seat is equipped). Refer toAttaching child safety seats withtether straps later in this chapter.10. Before pla

WARNING: Airbags can kill or injure a child in a child seat. Ifyou must use a forward-facing child seat in the front seat, moveseat all the way back.W

GAUGESSpeedometer: Indicates the current vehicle speed.Standard instrument clusterHarley-Davidson instrumentcluster2009 F-250/350/450/550 (f23)Owners

4. Insert the belt tongue into theproper buckle for that seatingpositions until you hear a snap andfeel it latch. Make sure the tongue issecurely latc

7. Before placing the child in theseat, forcibly move the seat forwardand back to make sure the seat issecurely held in place. To checkthis, grab the

2. Place the child safety seat in the center seating position.3. Route the tongue and webbing through the child seat according to thechild seat manufa

The passenger seats of your vehicle may be equipped with built-in tetherstrap anchors located behind the seats as described below.The tether anchors i

Tether strap attachment1. Route the child safety seat tether strap over the back of the seat.For vehicles with adjustable head restraints, route the t

• Front seat (SuperCab)• Rear seats (Crew Cab)If the tether strap is clipped incorrectly, the child safety seat may not beretained properly in the eve

Many tether straps cannot be tightened if the tether strap is hooked tothe loop directly behind the child seat. To provide a tight tether strap:1. Rou

Child booster seatsThe belt-positioning booster (booster seat) is used to improve the fit ofthe vehicle safety belt. Children outgrow a typical child

When children should use booster seatsChildren need to use booster seats from the time they outgrow thetoddler seat until they are big enough for the

Types of booster seatsThere are generally two types of belt-positioning booster seats: backlessand high back. Always use booster seats in conjunction

Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtemperature, the needle will be inthe normal range (between “

Children and booster seats vary in size and shape. Choose a booster thatkeeps the lap belt low and snug across the hips, never up across thestomach, a

The importance of shoulder beltsUsing a booster without a shoulder belt increases the risk of a child’shead hitting a hard surface in a collision. For

NOTICE TO UTILITY VEHICLE AND TRUCK OWNERSUtility vehicles and trucks handledifferently than passenger cars inthe various driving conditions thatare e

necessary. Information on transfer case operation and shifting procedurescan be found in the Driving chapter. Information on transfer casemaintenance

• Narrower — to provide greatermaneuverability in tight spaces,particularly in off-road use.As a result of the above dimensionaldifferences, SUV’s and

TreadwearThe treadwear grade is a comparative rating based on the wear rate ofthe tire when tested under controlled conditions on a specifiedgovernmen

TIRESTires are designed to give many thousands of miles of service, but theymust be maintained in order to get the maximum benefit from them.Glossary

INFLATING YOUR TIRESSafe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air

The cold inflation pressure should never be set lower than therecommended pressure on the Safety Compliance Certification Label orTire Label.When weat

Tire inflation informationAll tires with Steel Carcass Plies (if equipped):This type of tire utilizes steel cords in the sidewalls. As such, theycanno

Standard instrument clusterHarley-Davidson instrumentclusterEngine hour meter (ifequipped): Registers theaccumulated time the engine hasbeen running.

WARNING: Stay out of the trajectory (1) as indicated in theillustration.TIRE CAREInspecting your tiresPeriodically inspect the tire treads for uneven

Improper or inadequate vehicle maintenance can cause tires to wearabnormally. Inspect all your tires, including the spare, frequently, andreplace them

U.S. DOT Tire Identification Number (TIN)Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the s

WARNING: When mounting replacement tires and wheels, youshould not exceed the maximum pressure indicated on thesidewall of the tire to set the beads w

Safety practicesDriving habits have a great deal to do with your tire mileage and safety.• Observe posted speed limits• Avoid fast starts, stops and t

The tires should also be balanced periodically. An unbalanced tire andwheel assembly may result in irregular tire wear.Tire rotationRotating your tire

WARNING: If the tire label shows different tire pressures forthe front and rear tires and the vehicle is equipped with TPMS(tire pressure monitoring s

INFORMATION CONTAINED ON THE TIRE SIDEWALLBoth U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the

7. H: Indicates the tire’s speed rating. The speed rating denotes thespeed at which a tire is designed to be driven for extended periods oftime under

10. Tire Ply Composition and Material Used: Indicates the number ofplies or the number of layers of rubber-coated fabric in the tire tread andsidewall

Fuel gauge: Indicatesapproximately how much fuel is leftin the fuel tank (when the ignitionis in the on position). The fuelgauge may vary slightly whe

Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

TIRE PRESSURE MONITORING SYSTEM (TPMS) (IF EQUIPPED)Each tire, including the spare (ifprovided), should be checkedmonthly when cold and inflated tothe

following two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference received,including inter

When your temporary spare tire is installedWhen one of your road tires needs to be replaced with the temporaryspare, the TPMS system will continue to

Low TirePressureWarning LightPossible cause Customer Action RequiredSolid WarningLightTire(s)under-inflated1. Check your tire pressure toensure tires

Low TirePressureWarning LightPossible cause Customer Action RequiredFlashing WarningLightSpare tire in use Your temporary spare tire is inuse. Repair

tires are flat, repair as necessary.) Check air pressure in the road tires. Ifany tire is under-inflated, carefully drive the vehicle to the nearestlo

Storing the TPMS reset toolYou should store the TPMS resettool in the provided pocket of theowner guide case; however, beforestoring it, you will need

and remain on for approximately five (5) seconds. If the light does notilluminate, the tool needs to be replaced.TPMS reset tips:• To reduce the chanc

Altering the severity of the driving conditions is recommended to lowerthe transmission temperature into the normal range.Red area (over temperature)

4. Press and hold the brake pedalfor two (2) seconds, then release.5. Turn the ignition to off—DONOT remove the key.6. Cycle the ignition from off to

7. Train the TPMS sensors in the tires using the following TPMS resetsequence starting with the left front tire in the following clockwiseorder:1. Lef

10. Perform Steps 8 and 9 on the right front tire, right rear tire andfinally the left rear tire. Training is complete after the horn sounds forthe la

VEHICLE LOADING – WITH AND WITHOUT A TRAILERThis section will guide you in the proper loading of your vehicle and/ortrailer, to keep your loaded vehic

Payload – is the combined weight of cargo and passengers that thevehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Lab

Example only:Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue load

GAWR (Gross Axle Weight Rating) – is the maximum allowableweight that can be carried by a single axle (front or rear). Thesenumbers are shown on the S

WARNING: Exceeding the Safety Compliance Certification Labelvehicle weight rating limits could result in substandard vehiclehandling or performance, e

WARNING: Do not use replacement tires with lower loadcarrying capacities than the original tires because they maylower the vehicle’s GVWR and GAWR lim

• A final example for your vehicle with 1,400 lb. (635 kg) of cargo andluggage capacity. You and one of your friends decide to pick upcement from the

AUDIO SYSTEMSAM/FM stereo system (if equipped)WARNING: Driving while distracted can result in loss of vehiclecontrol, accident and injury. Ford strong

Your vehicle may tow a Conventional/Class IV trailer or fifth wheel trailerprovided the maximum trailer weight is less than or equal to themaximum tra

Maximum GCWR - lb. (kg.)Engine Rear axleratioManualtransmissionAutomatictransmissionF–250 Pick-up5.4L 3.73 15000 (6804) 16000 (7257)4.10 17000 (7711)

Preparing to towUse the proper equipment for towing a trailer and make sure it isproperly attached to your vehicle. Contact your authorized dealer or

Hitch TypeMaximumGross TrailerWeight — lb.(kg)MaximumTongue Weight— lb. (kg)6.8L DRWPickup2.5” ID withoutadapter(requires 2.5”drawbar)Weight carrying

WARNING: Do not adjust a weight distributing hitch to anyposition where the rear bumper of the vehicle is higher than itwas before attaching the trail

The TBC user interface consists ofthe following:1. +/- (GAIN adjustmentbuttons): Pressing these buttonswill adjust the TBC’s power outputto the traile

2. Manual control lever: Slide the control lever to the left to activatepower to the trailer’s electric brakes independent of the tow vehicle’sbrakes

6. If the trailer wheels lock-up (indicated by squealing tires), reduce theGAIN setting; if the trailer wheels turn freely, increase the GAIN setting.

• The TBC interacts with the brake system of the vehicle, includingABS, in order to reduce the likelihood of trailer wheel lockup.Therefore, if these

Servicing after towingIf you tow a trailer for long distances, your vehicle will require morefrequent service intervals. Refer to your scheduled maint

2. AUDIO: Press AUDIO repeatedlyto gain access to the followingsettings:TREB (Treble): Press AUDIO to reach the treble setting.Use/ / SEEK .BASS (Bass

Braking• The trailer brakes must be inspected and serviced at intervalsspecified by the manufacturer. This includes the shoes, drum andtrailer brake m

RECREATIONAL TOWINGFollow these guidelines if you have a need for recreational (RV) towing.An example of recreational towing would be towing your vehi

STARTINGPositions of the ignition1. Off— shuts off the engine and allaccessories/locks the steering wheeland allows key removal.2. Accessory— allows t

WARNING: If you smell exhaust fumes inside your vehicle, haveyour dealer inspect your vehicle immediately. Do not drive if yousmell exhaust fumes.Impo

If starting a vehicle with a manualtransmission:1. Make sure the parking brake isset.2. Push the clutch pedal to the floor.• Turn the key to 3 (on) wi

2. Turn the key to 4 (start), then release the key as soon as the enginebegins cranking. Your vehicle has a computer assisted cranking systemthat assi

WARNING: To reduce the risk of electrical shock, do not useyour heater with ungrounded electrical systems or two-pronged(cheater) adapters.Prior to us

How to Use the Engine Block HeaterEnsure the receptacle terminals are clean and dry prior to use. To cleanthem, use a dry cloth.Depending on the type

ABS warning lampThe ABS lamp in the instrumentcluster momentarily illuminateswhen the ignition is turned on. Ifthe light does not illuminate duringsta

Pull the release lever to release theparking brake. To prevent the pedalfrom releasing too quickly, placeyour left foot on the service brakepedal, the

7. CLK (Clock): Press CLK totoggle between the clock and radiofrequency.AM/FM stereo single CD/satellite compatible sound system(if equipped)WARNING:

into four-wheel drive mode (if equipped), the traction control system willbe automatically disabled. Traction control operation will resume whenthe ve

• Do not fill the power steering pump reservoir above the MAX mark onthe reservoir, as this may result in leaks from the reservoir.If the power steeri

WARNING: Vehicles with a higher center of gravity such asutility vehicles and trucks handle differently than vehicles with alower center of gravity. U

2. Apply the brake. Use a tool (or asmall screwdriver) to pry out theaccess cover. Insert the tool into theaccess hole and slide the whiteoverride but

Understanding the shift positions of the 5–speed automatictransmissionThis vehicle is equipped with an adaptive Transmission Shift Strategy.Adaptive S

D (Overdrive) with Tow/Haul OFFD (Overdrive) with Tow/Haul OFF is the normal driving position for thebest fuel economy. The overdrive function allows

3 (Third)Transmission starts and operates in third gear only.Used for improved traction on slippery roads. Selecting 3 (Third)provides engine braking.

MANUAL TRANSMISSION OPERATION (IF EQUIPPED)Using the clutchManual transmission vehicles have a starter interlock that preventscranking the engine unle

Recommended shift speedsDo not overspeed the engine when going downhill or steep grades. Ifequipped, use the tachometer and do not allow engine speed

Reverse1. Make sure that your vehicle is at a complete stop before you shift intoR (Reverse). Failure to do so may damage the transmission.2. Move the

In satellite radio mode (if equipped), press / to tune to thenext/previous channel.Satellite radio is available only with a valid SIRIUS radiosubscrip

WARNING: This system is not designed to prevent contact withsmall or moving objects. The system is designed to provide awarning to assist the driver i

The RSS automatically turns onwhen the gearshift lever is placed inR (Reverse) and the ignition is on.An RSS control allows the driver toturn the RSS

REAR-VIEW CAMERA SYSTEM (IF EQUIPPED)The rear-view camera system,located on the tailgate, provides avideo image, which appears in therear view mirror

Use the side mirrors and rear view mirror to get better coverage on bothsides and rear of the vehicle.When shifting out of R (Reverse) and into any ot

If the back end of the vehicle is hit or damaged, then check with yourauthorized dealer to have your rear video system checked for propercoverage and

Manual Shift On Stop (MSOS) 4x4 system (if equipped)The 4WD system is engaged ordisengaged by rotating the controlfor both front wheel hub locks fromt

The 4WD system:• provides 4x4 High engagement and disengagement while the vehicle ismoving.• is operated by a rotary control located on the instrument

Using a Manual Shift On Stop (MSOS) 4x4 system (if equipped)Note: High shift efforts may be encountered when attempting toshift into and out of 4x4 mo

Shifting from 4H (4x4 High) to 2H (2WD)Move the transfer case lever to 2H(2WD) at a stop or a vehicle speedbelow 5 mph (8 km/h).With the vehicle at co

5. If shifting to 2H (2WD) with the vehicle at a complete stop, disengagethe locking hubs (optional) by rotating the hub lock control from LOCKto FREE

Customer Assistance 349Reporting safety defects (U.S. only) 355Reporting safety defects (Canada only) 356Cleaning 357Maintenance and Specifications 36

• DELETE SONG: Press OK to delete a song title from the system’smemory. Press/ to cycle through the saved songs. When thesong title appears in the dis

Shifting from 2WD to 4x4 HIGHRotate the 4x4 control to the 4x4HIGH position at speeds up to55 mph (88 km/h).• The electronic shift 4x4system is design

3. Move the 4x4 control to the 4x4LOW position.4. Hold the shift conditions until the4x4 LOW indicator light illuminates.5. If the 4x4 LOW indicator l

How your vehicle differs from other vehiclesTruck and utility vehicles can differ from some other vehicles. Yourvehicle may be higher to allow it to t

• It often may be less risky to strike small objects, such as highwayreflectors, with minor damage to your vehicle rather than attempt asudden return

Emergency maneuvers• In an unavoidable emergency situation where a sudden sharp turnmust be made, remember to avoid “over-driving” your vehicle, i.e.,

WARNING: If the parking brake is fully released, but the brakewarning lamp remains illuminated, the brakes may not beworking properly. See your author

Mud and waterIf you must drive through highwater, drive slowly. Traction orbrake capability may be limited.When driving through water,determine the de

or straight down. Avoid driving crosswise or turning on steepslopes or hills. A danger lies in losing traction, slipping sideways andpossibly rolling

Avoid sudden applications of power and quick changes of direction onsnow and ice. Apply the accelerator slowly and steadily when startingfrom a full s

VEHICLE USED AS A STATIONARY POWER SOURCEAuxiliary equipment called power take-off, or PTO, is often added to theengine or transmission to operate uti

FADE: Press MENU to reach the fade setting. Use / / SEEK,SEEKto adjust the audio between the back (B) and front (F)speakers.SPEEDVOL (Speed sensitive

SNOWPLOWINGFord recommends that the Super Duty F-Series used for snow removalinclude the Snow Plow Package Option.Installing the snowplowWeight limits

• The snow plow prep package includes a unique powertrain controlstrategy which is required for diesel engine cooling during highwaydriving with the s

WARNING: Additional equipment such as snowplow equipmentmay effect the performance of the airbag sensors increasing therisk of injury. Please refer to

ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside

• towing of your disabled vehicle• emergency travel expense reimbursement• travel planning benefitsIn Canada, for uninterrupted Roadside Assistance co

FUEL PUMP SHUT-OFF SWITCHThis device stops the electric fuel pump from sending fuel to the enginewhen your vehicle has had a substantial jolt.After an

FUSES AND RELAYSFusesIf electrical components in thevehicle are not working, a fuse mayhave blown. Blown fuses areidentified by a broken wire withinth

Passenger compartment fuse panelThe fuse panel is located in thepassenger’s footwell. Remove thepanel cover to access the fuses.To remove the fuse pan

The fuses are coded as follows.Fuse/RelayLocationFuse AmpRatingProtected Circuits1 30A Not used (spare)2 15A Not used (spare)3 15A Family Entertainmen

Fuse/RelayLocationFuse AmpRatingProtected Circuits10 15A Cargo lamp, Puddle lamp, Switchbacklight11 10A Not used (spare)12 7.5A Power mirror switch, D

5. SEEK: In radio mode,press/ to access theprevious/next strong station.In CD/MP3 mode, press/to access the previous/next CD/MP3 track.In satellite ra

Fuse/RelayLocationFuse AmpRatingProtected Circuits31 10A Not used (spare)32 10A Restraints Control Module (RCM),Passenger Airbag DeactivationIndicator

Power distribution boxThe power distribution box is located in the engine compartment. Thepower distribution box contains high-current fuses that prot

Fuse/RelayLocationFuse AmpRatingProtected Circuits6 40A* ABS module (Pump)7 30A* Upfitter auxiliary switch #18 30A* Upfitter auxiliary switch #29 40A*

Fuse/RelayLocationFuse AmpRatingProtected Circuits29 30A* Passenger power seat30 10A** A/C clutch relay31 15A** Power fold mirror relay32 20A** Fuel p

Fuse/RelayLocationFuse AmpRatingProtected Circuits53 Relay PCM power bus (Fuses 68, 70,72, 74, 76) (Diesel engine only)54 Relay Starter solenoid55 Rel

Fuse/RelayLocationFuse AmpRatingProtected Circuits74 20A** Gasoline engines: VPWR:HEGO, CMS, MAFS, EVMV,CMCV, VCT, IMTVDiesel engine: VPWR: Engineload

Dissimilar spare tire/wheel informationWARNING: Failure to follow these guidelines could result in anincreased risk of loss of vehicle control, injury

3. Full-size dissimilar spare without label on wheelWhen driving with the full-size dissimilar spare tire/wheel, do not:• Exceed 70 mph (113 km/h)• Us

T-Type/Mini-Spare Tire Information (Harley Davidson only)Your vehicle may be equipped with a temporary spare tire. This sparetire is considered “tempo

Park on a level surface, activatehazard flashers and set the parkingbrake.• Automatic transmission: Placegearshift lever in P (Park).• Manual transmis

8. FOLDER : In folder mode,press FOLDERto access nextfolder on MP3 discs, if available.9.FOLDER: In folder mode,press FOLDER to access theprevious fol

Removing the spare tire (with spare tire carrier only)1. The following tools are required to remove the spare tire:• one handle extension and twotypic

3. Fully insert the jack handle (withone extension) through the bumperhole and into the guide tube. Thekey and lock will engage with aslight push and

1. Turn engine off and block thewheel that is diagonally opposite ofthe flat tire using the wheel chock,if equipped. If the vehicle is a4x4, lock the

• Front driver side (4x4)Note: Make sure the jack fits ontothe flat area on the outboard side ofthe differential.• Front passenger side (4x4)Note: Vie

Never use the front or reardifferential as a jacking point.WARNING: To lessen therisk of personal injury, donot put any part of your bodyunder the veh

12. Position the jack according to the following guides:• Front (4x2): F–350 DRWNote: Place jack directly underI-beam.• Front driver side (4x4): F–350

• Front: F–450/F–550• Rear: F-350 DRW• Rear: F-450/F-55013. Insert the jack handle into thepump linkage.14. Use an up-and-down motionwith the jack han

15. Remove the lug nuts with the lug wrench.16. Replace the flat tire with the spare tire, making sure the valve stemis facing outward on all front an

10–lug nut torque sequence19. Stow the flat tire. Refer to Stowing the flat/spare tire if the vehicleis equipped with a spare tire carrier.Note: Do no

If the ornament retention towers arealigned between the studs/lug nuts,the ornament is improperlyinstalled. This improper installationmay appear and s

In satellite radio mode (if equipped), press and hold to hear a briefsampling of the next channels. Press again to stop. In CATEGORYMODE, press SCAN t

4. Be sure to install all the clips on the nuts over the flanges so thatthere is an even gap all around and the retention clips are fully seated.Stowi

5. Repeat this tightness check procedure when servicing the spare tirepressure (every six months, per scheduled maintenance information),or at any tim

Inspect the wheel pilot hole prior toinstallation. If there is visiblecorrosion in wheel pilot hole,remove loose particles by wipingwith clean rag and

4. Check all battery terminals and remove any excessive corrosion beforeyou attach the battery cables. Ensure that vent caps are tight and level.5. Tu

3. Connect the negative (-) cable to the negative (-) terminal of theassisting battery.4. Make the final connection of the negative (-) cable to an ex

Removing the jumper cablesRemove the jumper cables in the reverse order that they wereconnected.1. Remove the jumper cable from the ground metal surfa

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

Note: Towing an ESOF 4x4 vehicle with the front wheels on the groundwithout disengaging the front hubs may cause damage to the automatictransmission.N

GETTING THE SERVICES YOU NEEDWarranty repairs to your vehicle must be performed by an authorizedFord, Lincoln, or Mercury dealer. While any authorized

Premium/Audiophile in-dash six CD/MP3/satellite compatible soundsystem (if equipped)WARNING: Driving while distracted can result in loss of vehiclecon

In Canada:Mailing Address (Ford vehicles)Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4Teleph

In the United States, a warranty dispute must be submitted to the BBBAUTO LINE before taking action under the Magnuson-Moss WarrantyAct, or to the ext

THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY)Your satisfaction is important to Ford Motor Company and to your dealer.If a warranty con

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to fee

If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio

ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro

To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at1–888–327–4236 (TTY: 1–800–424–9153); go to http://www.safercar.gov;or write to:

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3-A), which is

• After polishing chrome bumpers, apply a coating of MotorcraftPremium Liquid Wax (ZC-53-A), available from your authorized dealer,or an equivalent qu

ENGINEEngines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal. When washing:• Take care when

Satellite radio is available only with a valid SIRIUS radiosubscription. Check with your authorized dealer for availability.2.(Phone): If your vehicle

• 6.8L V10 gasoline enginePLASTIC (NON-PAINTED) EXTERIOR PARTSUse only approved products to clean plastic parts. These products areavailable from your

• The wiper blades can be cleaned with isopropyl (rubbing) alcohol orMotorcraft Premium Windshield Washer Concentrate (ZC-32–A),available from your au

4. Remove the soaked cloth, and if it is not soiled badly, use this cloth toclean the area by using a rubbing motion for 60 seconds.5. Following this,

INTERIORFor fabric, carpets, cloth seats and safety belts:• Remove dust and loose dirt with a vacuum cleaner.• Remove light stains and soil with Motor

LEATHER SEATS FOR THE KING RANCH F-250 AND F-350 CREWCAB ONLY (IF EQUIPPED)Your vehicle is equipped with seating covered in premium, top-grainleather

ConditioningBottles of King Ranch Leather Conditioner are available at the KingRanch Saddle Shop. Visit the Web site at www.krsaddleshop.com,ortelepho

Motorcraft Dash and Vinyl Cleaner (ZC-38–A)Motorcraft Deluxe Leather and Vinyl Cleaner (U.S. only) (ZC-11–A)Motorcraft Detail Wash (ZC-3–A)Motorcraft

SERVICE RECOMMENDATIONSTo help you service your vehicle, we provide scheduled maintenanceinformation which makes tracking routine service easy.If your

2. Block the wheels.WARNING: To reduce the risk of vehicle damage and/orpersonal burn injuries, do not start your engine with the aircleaner removed a

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENTRefer to the 6.0 and 6.4 Liter Power Stroke Direct Injection TurboDiesel Owner’s Guide Supplement for

song appears in the display that you would like to delete, press OK.The song will appear in the display for confirmation. Press OK againand the displa

6.8L V10 gasoline engine1. Windshield washer fluid reservoir2. Battery3. Transmission fluid dipstick (automatic transmission)4. Engine oil filler cap5

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

CHANGING THE WIPER BLADES1. Pull the wiper arm away from thevehicle. Turn the blade at an anglefrom the wiper arm. Push the locktab to release the bla

• 5.4L/6.8L gasoline engines only;for diesel engine information,refer to the 6.0 and 6.4 LiterDirect Injection Turbo DieselOwner’s Guide Supplement.6.

4. Install the dipstick and ensure it is fully seated.5. Fully install the engine oil filler cap by turning the filler cap clockwise1/4 of a turn unti

BATTERYWARNING: This vehiclemay be equipped with morethan one battery, removal of cablefrom only one battery does notdisconnect the vehicle electrical

WARNING: When lifting a plastic-cased battery, excessivepressure on the end walls could cause acid to flow through thevent caps, resulting in personal

• Always dispose of automotivebatteries in a responsible manner.Follow your local authorizedstandards for disposal. Call yourlocal authorized recyclin

When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “FULL COLD” level or within the“CO

• Add Motorcraft Premium Gold Engine Coolant or equivalentmeeting Ford specification WSS-M97B51-A1. Refer toMaintenance product specifications and cap

To view the station name or type: When the desired category appearsin the display, press TEXT/SCAN to toggle between displaying the stationtype (COUNT

Add the proper mixture of coolant and water to the cooling system byfollowing these steps:1. Before you begin, turn the engine off and let it cool.2.

Coolant refill capacityTo find out how much fluid your vehicle’s cooling system can hold, referto Maintenance product specifications and capacities in

What you should know about fail-safe cooling (if equipped)If the engine coolant supply is depleted, this feature allows the vehicle tobe driven tempor

WARNING: Never remove the coolant reservoir cap while theengine is running or hot.5. Re-start the engine and take your vehicle to a service facility.D

Observe the following guidelines when handling automotive fuel:• Extinguish all smoking materialsand any open flames beforerefueling your vehicle.• Al

RefuelingWARNING: Fuel vapor burns violently and a fuel fire can causesevere injuries. To help avoid injuries to you and others:• Read and follow all

If you must replace the fuel filler cap, replace it with a fuel fillercap that is designed for your vehicle. The vehicle warranty maybe void for any d

Octane recommendationsYour vehicle is designed to use“Regular” unleaded gasoline with apump (R+M)/2 octane rating of 87.We do not recommend the use of

If you have run out of fuel:• You may need to cycle the ignition from off to on several times afterrefueling to allow the fuel system to pump the fuel

• Use the same filling rate setting (low — medium — high) each timethe tank is filled.• Allow no more than two automatic click-offs when filling.• Alw

COMPRESS (Compression): Available only in CD/MP3 mode. PressMENU until COMPRESS ON/OFF appears in the display.Use/ / SEEK, SEEK to toggle ON/OFF. When

• Idling for long periods of time (greater than one minute) may wastefuel.• Anticipate stopping; slowing down may eliminate the need to stop.• Sudden

• Using fuel blended with alcohol may lower fuel economy.• Fuel economy may decrease with lower temperatures during the first8–10 miles (12–16 km) of

WARNING: Do not park, idle, or drive your vehicle in dry grassor other dry ground cover. The emission system heats up theengine compartment and exhaus

4. Driving through deep water—the electrical system may be wet.These temporary malfunctions can be corrected by filling the fuel tankwith good quality

The OBD-II system is designed to check the emission control systemduring normal driving. A complete check may take several days. If thevehicle is not

7. If the fluid is low, add fluid in small amounts, continuously checkingthe level until it is between the MIN and MAX range. Refer toMaintenance Prod

CLUTCH FLUID (IF EQUIPPED)Check the fluid level. Refer to scheduled maintenance information forthe service interval schedules.During normal operation,

1. Drive the vehicle 20 miles (30 km) or until it reaches normal operatingtemperature.2. Park the vehicle on a level surface and engage the parking br

The transmission fluid should be inthis range if at ambient temperature(50°F-95°F [10°C-35°C]).High fluid levelFluid levels above the safe rangemay re

Checking and adding manual transmission fluid (if equipped)1. Clean the filler plug.2. Remove the filler plug andinspect the fluid level.3. Fluid leve

CONGRATULATIONSCongratulations on acquiring your new Ford. Please take the time to getwell acquainted with your vehicle by reading this handbook. The

7. SHUFFLE: In CD/MP3 mode,press SHUFFLE to engage shufflemode. SHUFFLE ON will appear inthe display. If you wish to engage shuffle mode right away, p

TRANSFER CASE FLUID (IF EQUIPPED)1. Clean the filler plug.2. Remove the filler plug andinspect the fluid level.3. Add only enough fluid throughthe fil

AIR FILTERRefer to the scheduled maintenance information for the appropriateintervals for changing the air filter element.When changing the air filter

3. Pull air filter cover toward passenger side of vehicle and up to releasethe tabs. Lift air filter element up and out of housing.The air filter box

MOTORCRAFT PART NUMBERSComponent 5.4L V8/6.8L V10 enginesAir filter element FA-1883Fuel filter FG-1083Oil filter FL-820-SPCV valve1Battery (Standard)

MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIESItem Capacity Ford part nameFord part number /Ford specificationFront axle 5.8 pints (2.8L)Motorcraft

Item Capacity Ford part nameFord part number /Ford specificationEngine coolant - 6.8LV10 engine227.5 quarts(26.0L)Motorcraft PremiumGold Engine Coolan

Item Capacity Ford part nameFord part number /Ford specificationHinges, latches, strikerplates, fuel filler doorhinge and seat tracks— Multi-Purpose G

Item Capacity Ford part nameFord part number /Ford specificationWindshield washer fluid 3.5 quarts (3.3L)Motorcraft PremiumWindshield WasherConcentrat

ENGINE DATAEngine 5.4L V8 engine 6.8L V10 engineCubic inches 330 415Required fuel 87 octane 87 octaneFiring order 1-3-7-2-6-5-4-8 1-6-5-10-2-7-3-8-4-9

IDENTIFYING YOUR VEHICLESafety Compliance Certification LabelThe National Highway Traffic SafetyAdministration Regulations requirethat a Safety Compli

In CD/MP3 mode, press and release to display track title, artist name,and disc title and file name (if available).In satellite radio mode (if equipped

The Vehicle Identification Number (VIN) contains the followinginformation:1. World manufacturer identifier2. Brake system / Gross VehicleWeight Rating

GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local Ford or Ford of

LifestyleAsh cup / smoker’s packageBedliners and bedmatsCargo organization and managementTowing mirrorsTrailer hitches, wiring harnesses and accessori

AAccessory delay ...110Air cleaner filter ...401, 403Air conditioning ...84Airbag supplemental

washing ...357waxing ...358wheels ...358wiper bl

recommendations ...374refill capacities ...404Event data recording ...7Exhaust fumes ...

Instrument panelcleaning ...361–362cluster ...14lighting up panel andinterior ...

Power distribution box(see Fuses) ...321Power door locks ...153Power mirrors ...

TTailgate ...148Temperature control (seeClimate control) ...80Tilt steering wheel ...

discs, one at a time, label side up, when prompted. Once loaded, the discin the last slot loaded will begin to play.Note: An MP3 disc with folders wil

If your vehicle is equipped with a navigation system, refer to Auxiliaryinput jack section in the Audio features chapter of your Navigationsystem supp

3. If the music sounds distorted at lower listening levels, turn theportable music player volume down. If the problems persist, replace orrecharge the

Radio reception factors:There are three factors that can affect radio reception:• Distance/strength: The further you travel from an FM station, thewea

Do not use any irregular shapedCDs or discs with a scratchprotection film attached.CDs with homemade paper(adhesive) labels should not beinserted into

Sample MP3 structureIf you are burning your own MP3discs, it is important to understandhow the system will read thestructures you create. While variou

• Terrain: Hills, mountains, tall buildings, bridges, tunnels, freewayoverpasses, parking garages, dense tree foliage and thunderstorms caninterfere w

Radio Display Condition Action RequiredACQUIRING Radio requires morethan two seconds toproduce audio for theselected channel.No action required.This m

SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ

Radio Display Condition Action RequiredNO TEXT Song title informationnot available.Song title informationnot available at thistime on this channel.The

FAMILY ENTERTAINMENT DVD SYSTEM (IF EQUIPPED)WARNING: Driving while distracted can result in loss of vehiclecontrol, accident and injury. Ford strongl

Press VIDEO to change the sourcedisplayed on the screen. Pressrepeatedly to cycle through:DVD-DISC, DVD-AUX, NON-DVD,OFF.Press the power button to tur

3. The disc will begin to play andthe ‘MP3 Audio Disc’ screen willdisplay and allow you to access theCOMPRESSION, SHUFFLE, SCANand FOLDER MODE feature

• Black (4) — wired headphone output (wired headphones notincluded)1. Press theheadphone/speaker/ buttonon the DVD player or press the 2and 4 memory p

2. Adjust the volume levels usingthe volume controls on the DVDsystem.To adjust display brightness:To decrease/increase the brightnesslevel on the dis

Note: Headphone A can access any possible media (AM, FM1, FM2, SAT(if equipped), CD, DVD, DVD-AUX). Headphone B can only access DVDand DVD-AUX.For fur

8. Infrared (IR) Receiver & Transmitter: System sensor which readsthe signals from the remote control and sends audio signals to theinfrared (IR)

15. ENTER: Press to select/confirmthe current selection.16. Cursor /Brightness controls:Use the cursor controls to makevarious selections when in anym

1. Power control: Press to turn the FES (Family EntertainmentSystem) ON/OFF.2. Cursor controls: Use in various active menus to advance the cursorup/do

PERCHLORATE MATERIALCertain components of this vehicle such as airbag modules, seat beltpretensioners, and button cell batteries may contain Perchlora

8. Fast Forward/Next: In DVD mode, press and hold for a quickadvance within the DVD. Press and release to advance to the nextchapter. In CD/MP3 mode,

Battery replacementBatteries are supplied with the remote control unit. Since all batterieshave a limited shelf life, replace them when the unit fails

Your FES system is equipped withtwo sets of battery powered,infrared wireless headphones. TwoAAA batteries are needed to operatethe headphones. (Batte

To install the batteries, remove the screw at the bottom of the cover.Then, lightly press down on top and slide the cover off.When replacing the batte

To operate the headphones:• Press POWER on the ear piece to turn on the headphones. A redindicator light will illuminate indicating the headphones are

Wired headphonesWARNING: Do not leave children unattended in the vehicle anddo not let children operate the system while unsupervised. Ifwired headpho

Single Play: Single play consists of all occupants in the vehicle listeningto the same playing media over the front and rear speakers. When theDVD sys

Operation with an aftermarket audio system(Headphone only mode)When the Family Entertainment System (FES) detects that the originalradio supplied by F

This is disc dependent — someDVD discs may have more viewingangles to select from. Once youhave made your selection, pressENTER to confirm. The system

Once you have made your selection,press ENTER to confirm. Thesystem default is English.SubtitlesSelect SUBTITLES to turn thesubtitle option on or off.

Service Data RecordingService data recorders in your vehicle are capable of collecting andstoring diagnostic information about your vehicle. This pote

COMP (Compression): Compression brings soft and loud CD passagestogether for a more consistent listening level when in CD mode. Press toturn the featu

• Bit rate — The player supports bit rates from 32–320 kbps, as well asvariable bit rate MP3 files, but lower bit rates will have a noticeableeffect o

jammed. It is recommended that homemade CDs or DVDs beidentified with permanent felt tip marker rather than adhesivelabels. Ball point pens may damage

2. Press and hold the reverse oradvance button to enter into slowplay mode. Once in slow play mode,press and release the reverse or advance button rep

The B headphone jack (5) is locatedon the right side of the DVD system.Plug in wired headphones (notincluded) here.Note: The B headphones can onlyacce

There are three levels of control ofthe FES buttons. The states areFULL (enabled), LOCAL orLOCKED (disabled). To change the level of control, press th

rights owners. Use of this copyright protection technology must beauthorized by Macrovision Corporation, and is intended for home andother limited vie

WARNING: The driver should not attempt to operate anyfunction of the DVD system while the vehicle is in motion. Givefull attention to driving and to t

Care and service of the DVD playerEnvironmental extremesDVD players which are subjected to harsh environmental conditions maybe damaged or perform at

Cleaning DVD and CD discsInspect all discs for contamination before playing. If necessary, cleandiscs only with an approved DVD and CD cleaner and wip

To access this information, special equipment must be directly connectedto the recording modules. Ford Motor Company and Ford of Canada donot access e

HEATER ONLY SYSTEM(IF EQUIPPED)1. Fan speed adjustment: Controlsthe volume of air circulated in thevehicle.2. Temperature selection:Controls the tempe

3. Set the fan speed to the highest setting.4. Direct the outer instrument panel vents towards the side windows.To increase airflow to the outer instr

2. Temperature selection: Controls the temperature of the airflow inthe vehicle.3. Air flow selections: Controls the direction of the airflow in theve

Operating tips• To reduce fog build up on the windshield during humid weather, placethe air flow selector in theposition.• To reduce humidity build up

DUAL AUTOMATIC TEMPERATURE CONTROL (DATC) SYSTEMS(IF EQUIPPED)• DATC• DATC with heated mirrors2009 F-250/350/450/550 (f23)Owners Guide, 1st PrintingUS

• DATC with heated seats and heated mirrorsTemperature conversion: To switch between Fahrenheit and Celsius,refer to Units (English/Metric) under eith

4. Recirculation control: Press to activate/deactivate airrecirculation in cabin. Recirculated air may reduce the amount of time tocool down the inter

Operating tips• To reduce fog build up on the windshield during humid weather, placethe air flow selector in theposition.• To reduce humidity build up

To aid in side window defogging/demisting in cold weather:1. Select.2. Select A/C.3. Adjust the temperature control to maintain comfort.4. Set the fan

HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the headlamps on.Autola

Special instructionsFor your added safety, your vehicle is fitted with sophisticated electroniccontrols.WARNING: Please read the section Airbag Supple

Daytime running lamps (DRL) (if equipped)Turns the headlamps on with a reduced output.To activate:• the ignition must be in the on position,• the head

PANEL DIMMER CONTROLUse to adjust the brightness of theinstrument panel and all applicableilluminated switches in the vehicleduring headlamp and parkl

To adjust the headlamps:1. Park your vehicle on a levelsurface about 25 feet (7.6 meters)away from a vertical plain surface(3). Check your headlamp al

5. Locate the vertical adjuster (2)for each headlamp. Adjust the aimby turning the adjuster controleither clockwise (to adjust up) orcounterclockwise

• (4) Horizontal reference line2. Measure the height from thecenter of your headlamp (indicatedby a 3.0 mm circle on the lens) tothe ground and mark a

MAP LAMPS (IF EQUIPPED)The dome lamp turns on when:• any door is opened,• the instrument panel dimmerswitch is rotated up until thecourtesy lamps come

Replacing exterior bulbsCheck the operation of all the bulbs frequently.Function Numberof bulbsTrade numberHeadlamps (aerodynamic) 2 H13/9008Headlamps

Replacing headlamp bulbs (aerodynamic)1. Make sure that the headlamps are off and open the hood.2. Remove the four bolts from thetop, side and bottom

Replacing park/turn and sidemarker lamp bulbs (aerodynamic)1. Make sure that the headlamps are off and open the hood.2. Remove the four bolts from the

2. Remove the three screws and onebolt from the top and bottom of thepark lamp/bezel assembly.3. Remove the four screws and theheadlamp retaining ring