Ford 2009 Flex v.2 Manual do Utilizador

Introduction 4Instrument Cluster 12Warning lights and chimes 12Gauges 16Entertainment Systems 19AM/FM stereo with CD/MP3 19Auxiliary input jack (Line

These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Airbag - FrontAirbag

An auxiliary power point is locatedby the passenger’s ankle near thefloor in the front console bin. Asecond one is located in the centerconsole utilit

• do not leave battery chargers, video game adapters, computers andother devices plugged in overnight or when the vehicle is parked forextended period

WARNING: Do not keep electrical devices plugged in the powerpoint whenever the device is not in use. Do not use anyextension cord with the 110 VAC pow

Press and pull the window switchesto open and close windows.• Push down (to the first detent)and hold the switch to open.• Pull up (to the first deten

Window lockThe window lock feature allows onlythe driver to operate the powerwindows.To lock out all the window controls(except for the driver’s) pres

Automatic dimming interior rear view mirrorYour vehicle is equipped with an interior rear view mirror that has anauto-dimming function. The electronic

To adjust your mirrors:1. Rotate the control clockwise toadjust the right mirror and rotatethe control counterclockwise toadjust the left mirror.2. Mo

Memory feature (if equipped)The accelerator and brake pedal positions are saved when doing amemory set function and can be recalled along with the veh

• If the vehicle speed increases above the set speed on a downhill, youmay want to apply the brakes to reduce the speed.• If the vehicle speed decreas

Reducing speed while using speed controlThere are two ways to reduce a setspeed:• Press and hold the SET - controluntil you get to the desiredspeed, t

Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleasePanic Alarm Engine Oi

STEERING WHEEL CONTROLS (IF EQUIPPED)Radio control featuresPress MEDIA to select:• AM, FM1, FM2, or CD• DVD/FES (if equipped)• SAT1, SAT2 or SAT3 (Sat

Navigation system hands freecontrol features (if equipped)Press and holdcontrol brieflyuntil the voiceicon appears onthe navigation display to use the

For further information on the Navigation system/SYNC system, refer tothe Navigation System and SYNC supplements.MULTI-PANEL VISTA ROOF (IF EQUIPPED)T

The multi-panel vista roof has a built-in sliding shade that can bemanually opened or closed when the glass panel is shut. To close theshade, pull it

1. Position the end of yourhand-held transmitter 1–3 inches(2–8 cm) away from the HomeLink威button you wish to program (locatedon your visor) while kee

Gate Operator & Canadian ProgrammingDuring programming, yourhand-held transmitter mayautomatically stop transmitting —not allowing enough time for

Erasing HomeLink姞 buttonsTo erase the three programmedbuttons (individual buttons cannotbe erased):• Press and hold the two outerHomeLink威 buttons unt

Selectable featuresResetPress this control to select and resetfunctions shown in the INFO menuand SETUP menu.Info menuThis control displays the follow

Average fuel economy (AFE)Select this function from the INFOmenu to display your average fueleconomy in miles/gallon orliters/100 km.If you calculate

Blank displaySelect this function from the INFO menu to turn display off.Setup menuPress this control for the followingdisplays:• Reset to English (if

WARNING LIGHTS AND CHIMESWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause extensive repairs. A wa

The sequence of the system check report is as follows:1. OIL LIFE2. CHARGING SYSTEM3. WASHER FLUID LEVEL4. DOOR AJAR STATUS5. BRAKE SYSTEM6. DISTANCE

Autolamp delayThis feature keeps your headlights on for up to three minutes after theignition is switched off.1. To disable/enable the autolampdelay f

Reverse Sensing System (Rear Park aid)This feature sounds a warning tone to warn the driver of obstacles nearthe rear bumper, and functions only when

the message center after you acknowledge the warning by pressing theRESET control and clearing the warning message.Warning messages that have been res

REAR RIGHT DOOR AJAR — Displayed when the rear right door isnot completely closed.PARK BRAKE ENGAGED — Displayed when the manual park brake isset, the

Loading chapter. If the warning stays on or continues to come on,contact your authorized dealer as soon as possible.OIL LIFE CHANGE SOON — Displayed w

POWER LIFTGATE (PLG) (IF EQUIPPED)You can power open or close the liftgate with the following controls.• instrument panel control button• integrated k

Care should be exercised in starting the engine before the liftgate is fullyclosed (latched). If the ignition is cycled during a Liftgate Power Closec

To power open the liftgate withoutside liftgate control button:1. To open, unlock the liftgate withthe integrated keyhead transmitteror power door unl

Obstacle detection:The power liftgate system is equipped with an obstacle detection feature.If the power liftgate is closing, the system will reverse

WARNING: Under engine misfire conditions, excessive exhausttemperatures could damage the catalytic converter, the fuelsystem, interior floor coverings

CARGO AREA FEATURESCargo net (if equipped)The cargo pouch net secureslightweight objects in the cargoarea. Attach the net to the anchorsprovided. Do n

WARNING: Loaded vehicles, with a higher center of gravity,may handle differently than unloaded vehicles. Extraprecautions, such as slower speeds and i

KEYSYour vehicle is equipped with twoIntegrated Keyhead Transmitters(IKTs). The IKT functions as both aprogrammed ignition key thatoperates all the lo

Recommended handling of the Integrated Keyhead Transmitter(IKT)To avoid inadvertently activating the remote entry functions of yourvehicle, it is reco

POWER DOOR LOCKS• Press thecontrol to unlock alldoors.• Press thecontrol to lock alldoors.Smart locksThis feature helps to prevent you from locking yo

Deactivating/activating autolock featureYour vehicle comes with the autolock features activated; there are fourmethods to enable/disable this feature:

Keyless entry keypad autolock enable/disable procedure1. Turn the ignition to the offposition.2. Close all the doors.3. Enter factory–set 5–digit entr

Note: The autounlock feature can be activated/deactivatedindependently of the autolock feature.Power door lock switch autounlock enable/disable proced

Keyless entry keypad autounlock enable/disable procedure1. Turn the ignition to the offposition.2. Close all the doors.3. Enter factory–set 5–digit en

REMOTE ENTRY SYSTEMThe Integrated Keyhead Transmitter (IKT) complies with part 15 of theFCC rules and with RSS-210 of Industry Canada. Operation is su

Airbag readiness: If this light failsto illuminate when the ignition isturned to on, continues to flash orremains on, have the systemserviced immediat

• Vehicles not equipped with apower liftgateThe typical operating range for your IKT is approximately 33 feet(10 meters). A decrease in operating rang

2. Press and release again within three seconds to unlock all thedoors.The remote entry system activates the illuminated entry feature; thisfeature tu

WARNING: Make sure the liftgate is closed to prevent exhaustfumes from being drawn into the vehicle. This will also preventpassengers and cargo from f

3. Within three seconds press the control on the Integrated KeyheadTransmitter.4. A tone will be heard when the activation is complete.5. Repeat this

4. Insert the new battery. Refer to the instructions inside the IKT for thecorrect orientation of the battery. Press the battery down to ensure thatth

Perimeter lamps illuminated entryWith the Integrated Keyhead Transmitter system, the following items willilluminate when thecontrol on the transmitter

6. Press the power door unlock control twice within five seconds. Note:The horn will chirp once to indicate the perimeter lighting feature hasbeen dea

SECURICODE™ KEYLESS ENTRY SYSTEMThe keypad is invisible until touched and then it lights up so you can seeand touch appropriate buttons.You can use th

Tips:• Do not set a code that uses five of the same number.• Do not use five numbers in sequential order.• The factory set code will work even if you

SECURILOCK™ PASSIVE ANTI-THEFT SYSTEMSecuriLock™ passive anti-theft system is an engine immobilizationsystem. This system is designed to help prevent

Low tire pressure warning:Illuminates when your tire pressureis low. If the light remains on atstart up or while driving, the tirepressure should be c

Anti-theft indicatorThe anti-theft indicator is located in the instrument panel cluster.• When the ignition is in the offposition, the indicator will

Replacement Integrated Keyhead Transmitters (IKT) and codedkeysNote: Your vehicle comes equipped with two Integrated KeyheadTransmitters (IKTs). The I

Please read and understand theentire procedure before you begin.1. Insert the first previouslyprogrammed coded key into theignition.2. Turn the igniti

PERIMETER ALARM SYSTEM (IF EQUIPPED)The perimeter anti-theft system will help protect your vehicle fromunauthorized entry.If there is any potential pe

• Touch the 7 • 8 and 9 • 0controls on the keyless entry padat the same time to lock thedoors (driver’s door must beclosed).There is a 20 second count

SEATINGWARNING: Reclining the seatback can cause an occupant toslide under the seat’s safety belt, resulting in severe personalinjuries in the event o

To adjust the head restraint, do the following:1. Adjust the seatback to an upright driving/riding position. Refer toAdjusting the front manual seat l

To remove the adjustable head restraint, do the following:1. Pull up the head restraint until itreaches the highest adjustmentposition.2. Simultaneous

WARNING: To minimize the risk of neck injury in the event of acrash, head restraints must be installed properly.Adjusting the front manual seat (if eq

Using the manual lumbar support (if equipped)The lumbar control is located on theside of the seat cushion.Turn to adjust lumbar support.Rotate the lum

Headlamps on warning chime: Sounds when the headlamps or parkinglamps are on, the ignition is off (the key is not in the ignition) and thedriver’s doo

Adjusting the front power seat (if equipped)WARNING: Never adjust the driver’s seat or seatback when thevehicle is moving.WARNING: Do not pile cargo h

Move the front of the control up ordown to tilt the seat cushion.Move the rear of the control up ordown to raise or lower the seatcushion.Move the con

Using the power lumbar support (if equipped)The power lumbar control is located on the outboard side of the seat.Press the forward side of the control

Memory seat/power mirrors/adjustable pedals (if equipped)This system allows automaticpositioning of the driver seat,outside rearview mirrors andadjust

REAR SEATSHead restraintsLift the head restraint so that it is located directly or as close as possiblebehind your head.The head restraints can be mov

To remove the adjustable head restraint, do the following:1. Pull up the head restraint until itreaches the highest adjustmentposition.2. Press and ho

Adjusting second row bucket and bench seat backLift the handle to adjust seatback.Using same control will fold theseatback flat.WARNING: Always drive

1. Lift the handle located on theside of the seat.The seatback will fold flat.2. Lift the handle all the way upuntil the seat releases from thefloor.

3. To return the seatback to thefloor from tumbled position, rotatethe seat down until you hear itlatching to the floor.4. To return the seatback to t

Press the control located at theback of the rear door opening onetime to fold the seat back down andtumble the seat forward for accessto the 3rd row.E

Engine coolant temperaturegauge: Indicates engine coolanttemperature. At normal operatingtemperature, the needle will be inthe normal range (between “

4. To return the seatback to theupright position• Lift the seatback toward the rearof the vehicle, and• Rotate the seatback until youhear a click, loc

WARNING: Do not adjust or release the seat floor latch whilevehicle is in motion. Do not operate the vehicle with seats intumbled position. Always lat

Stowing the third row seat1. Remove all objects from the seatand stowage tub.2. Stow the head restraints bypushing the head restraint releasebutton wh

Note: Do not use the third rowseatback as a load floor when theseatback is folded.Note: In order to allow the seat to latch in the stowed position, do

2. To return the seatback to uprightposition, pull the number 1 strap,then while holding the number 1strap, pull the long strap located onthe seatback

WARNING: Do not drive the vehicle when the third row seat isrotated backwards. During a sudden stop, the safety belts arenot functional in this positi

The fact that the pretensioners or airbags did not activate for both frontseat occupants in a collision does not mean that something is wrong withthe

WARNING: Air bags can kill or injure a child in a child seat.NEVER place a rear-facing child seat in front of an active airbag. If you must use a forw

Determining if the Personal Safety System姞 is operationalThe Personal Safety System威 uses a warning light in the instrumentcluster or a back-up tone t

WARNING: It is extremely dangerous to ride in a cargo area,inside or outside of a vehicle. In a collision, people riding inthese areas are more likely

Trip odometer: Registers the miles(kilometers) of individual journeys.Press and release the messagecenter INFO button until “TRIP A”appears in the dis

2. To unfasten, push the releasebutton and remove the tongue fromthe buckle.All restraints in the vehicle are combination lap and shoulder belts.While

Automatic locking modeWhen to use the automatic locking modeIn this mode, the shoulder belt is automatically pre-locked. The belt willstill retract to

How to disengage the automatic locking modeWARNING: Ford Motor Company recommends that allpassenger safety belt assemblies and attaching hardware shou

WARNING: The driver and front passenger safety belt system(including retractors, buckles and height adjusters) must bereplaced if the vehicle is invol

Belt-Minder姞The Belt-Minder威 feature is a supplemental warning to the safety beltwarning function. This feature provides additional reminders byinterm

The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data):Reasons given... Consider...“Crashes are ra

Reasons given... Consider...“I have an airbag” Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate

The driver and front passenger Belt-Minder威 features can bedeactivated/activated by performing the following procedure:Before following the procedure,

AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)The airbag supplemental restraint system (SRS) is designed to work inconjunction with the safety belts to he

WARNING: Do not place any object between an occupant andan airbag or near any other airbag covering. The airbag may notinflate properly and might forc

AUDIO SYSTEMSAM/FM CD/MP3 satellite compatible sound systemWARNING: Driving while distracted can result in loss of vehiclecontrol, accident and injury

WARNING: Modifying or adding equipment to the front end ofthe vehicle (including frame, bumper, front end body structureand tow hooks) may affect the

The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt

• driver and front passenger safety belt pretensioner• a readiness light and tone.• diagnostic module.• the electrical wiring which connects the compo

The front passenger sensing system will turn off the passenger seat sideairbag if:• the seat is empty and safety belt is unbuckled.The front passenger

• If the indicator lamp remains lit even after this, the person should beadvised to ride in the rear seat.OccupantPass Airbag OffIndicator LightPassen

ObjectsPass Airbag OffIndicator LightPassenger AirbagSmall (i.e. three-ringbinder, small purse,bottled water)Unlit DisabledMedium (i.e. heavybriefcase

In case there is a problem with thefront passenger sensing system, theairbag readiness lamp in theinstrument cluster will stay lit.If the airbag readi

A difficulty with the system is indicated by one or more of the following:• The readiness light (same lightfor front and side airbag system)will eithe

automotive safety experts known as the Side Airbag Technical WorkingGroup. These recommended testing procedures help reduce the risk ofinjuries relate

WARNING: Several air bag system components get hot afterinflation. Do not touch them after inflation.WARNING: If the sideairbag has deployed, theairba

Locks and Security 132Keys 132Locks 134Anti-theft system 149Seating and Safety Restraints 155Seating 155Safety restraints 175Airbags 188Child restrain

Setting the clockTo set the time, press CLOCK. Thedisplay will read SET TIME. Use thememory preset numbers (0–9) toenter in the desired time–hours and

WARNING: All occupants of the vehicle including the drivershould always wear their safety belts even when an airbag SRSand Safety Canopy威 system is pr

The Safety Canopy威 system, in combination with safety belts, can helpreduce the risk of severe injuries in the event of a significant side impactcolli

Determining if the system is operationalThe SRS uses a readiness light in the instrument cluster or a tone toindicate the condition of the system. Ref

Important child restraint precautionsWARNING: Always make sure your child is secured properly ina device that is appropriate for their height, age and

Recommendations for Safety Restraints for ChildrenChild size, height, weight, or ageRecommendedrestraint typeInfantsortoddlersChildren weighing 40 lb

Recommendations for attaching child safety restraints for childrenRestraintTypeChildWeightUse any attachment method as indicatedbelow by “X”LATCH(lowe

WARNING: Never let a passenger hold a child on his or her lapwhile the vehicle is moving. The passenger cannot protect thechild from injury in a colli

If the child is the proper height, age, and weight (as specified by yourchild safety seat or booster manufacturer), fits the restraint and can berestr

restrained properly in a rear seating position, properly restrain thelargest child in the front seat.When installing a child safety seat with combinat

2. Pull down on the shoulder beltand then grasp the shoulder beltand lap belt together.3. While holding the shoulder andlap belt portions together, ro

MEMORY PRESETS (0–9): Whentuned to any station, press and holda preset button until sound returnsand PRESET # SAVED appears in the display. You can sa

5. To put the retractor in theautomatic locking mode, grasp theshoulder portion of the belt and pulldownward until all of the belt ispulled out.6. All

10. Before placing the child in theseat, forcibly move the seat forwardand back to make sure the seat issecurely held in place. To checkthis, grab the

Your vehicle has LATCH lower anchors for child seat installation at theseating positions marked with the child seat symbol.The LATCH anchors are locat

WARNING: Depending on where you secure a child restraint,and depending on the child restraint design, you may blockaccess to certain safety belt buckl

Attach the tether strap afterward, if included with the child seat. Referto Recommendations for attaching safety restraints for children inthis chapte

Perform the following steps to attach a child safety seat to the tetheranchor:1. Route the child safety seat tetherstrap over the back of the seat.Lif

• 2nd row bench (60/40)• 3rd rowNote: The cargo tie-downs at therear edge of the floor are nottether anchors.3. Clip the tether strap to theanchor as

4. Rotate the tether strap clip.5. Tighten the child safety seattether strap according to themanufacturer’s instructions.If the safety seat is not anc

Booster seats position a child so that vehicle lap/shoulder safety belts fitbetter. They lift the child up so that the lap belt rests low across the h

• Backless booster seatsIf your backless booster seat has aremovable shield, remove theshield. If a vehicle seating positionhas a low seat back or no

CD/MP3 PlayerCD: Press to enter CD/MP3 mode. Ifa disc is already loaded into thesystem, CD/MP3 play will beginwhere it ended last. If no CD is loaded,

Children and booster seats vary in size and shape. Choose a booster thatkeeps the lap belt low and snug across the hips, never up across thestomach, a

Move a child to a different seating location if the shoulder belt does notstay positioned on the shoulder during use.Follow all instructions provided

NOTICE TO CROSSOVER VEHICLE OWNERSCrossover vehicles handle differentlythan passenger cars in the variousdriving conditions that areencountered on str

driving surfaces are relatively level, obstruction-free and otherwisesimilar to normal on-road driving conditions. Operating your vehicleunder other t

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGTire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereappli

WARNING: The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydro

Increasing the inflation pressure beyond this pressure will not increasethe tire’s load carrying capability.• kPa: Kilopascal, a metric unit of air pr

WARNING: Under-inflation is the most common cause of tirefailures and may result in severe tire cracking, tread separationor ⬙blowout⬙, with unexpecte

Note: If you have to drive a distance to get air for your tire(s), checkand record the tire pressure first and add the appropriate air pressurewhen yo

Improper or inadequate vehicle maintenance can cause tires to wearabnormally. Inspect all your tires, including the spare, frequently, andreplace them

SEEK: Press SEEK toaccess the previous/next track.CAT (Category) / FOLD(Folder):In MP3 mode only– PressCAT/FOLD and thenpressSEEK to access the previo

U.S. DOT Tire Identification Number (TIN)Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the s

WARNING: When mounting replacement tires and wheels, youshould not exceed the maximum pressure indicated on thesidewall of the tire to set the beads w

• Do not run over curbs or hit the tire against a curb when parkingWARNING: If your vehicle is stuck in snow, mud, sand, etc., donot rapidly spin the

• Front Wheel Drive (FWD)vehicles (front tires at top ofdiagram)• Rear Wheel Drive (RWD)vehicles/Four Wheel Drive(4WD)/All Wheel Drive (AWD)vehicles (

Sometimes irregular tire wear can be corrected by rotating the tires.Note: If your tires show uneven wear ask an authorized dealer to checkfor and cor

3. 65: Indicates the aspect ratio which gives the tire’s ratio of height towidth.4. R: Indicates a “radial” type tire.5. 15: Indicates the wheel or ri

8. U.S. DOT Tire Identification Number (TIN): This begins with theletters “DOT” and indicates that the tire meets all federal standards. Thenext two n

13. Maximum Permissible Inflation Pressure: Indicates the tiremanufacturers’ maximum permissible pressure and/or the pressure atwhich the maximum load

Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8

TIRE PRESSURE MONITORING SYSTEM (TPMS)Each tire, including the spare (ifprovided), should be checkedmonthly when cold and inflated tothe inflation pre

Satellite Radio (if equipped)Satellite radio is available only with a valid SIRIUS radiosubscription. Check with your authorized dealer for availabili

The Tire Pressure Monitoring System complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is subject to thefollowing tw

Understanding your Tire Pressure Monitoring System (TPMS)The Tire Pressure Monitoring System measures pressure in your fourroad tires and sends the ti

When you believe your system is not operating properlyThe main function of the Tire Pressure Monitoring System is to warn youwhen your tires need air.

Low Tire PressureWarning LightPossible cause Customer Action RequiredFlashing WarningLightSpare tire inuseYour temporary spare tire is inuse. Repair t

SNOW TIRES AND CABLES/CHAINSWARNING: Snow tires must be the same size, load index, speedrating as those originally provided by Ford. Use of any tire o

VEHICLE LOADING – WITH AND WITHOUT A TRAILERThis section will guide you in the proper loading of your vehicle and/ortrailer, to keep your loaded vehic

Payload – is the combined weight of cargo and passengers that thevehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Lab

Example only:Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue load

GAWR (Gross Axle Weight Rating) – is the maximum allowableweight that can be carried by a single axle (front or rear). Thesenumbers are shown on the S

WARNING: Exceeding the Safety Compliance Certification Labelvehicle weight rating limits could result in substandard vehiclehandling or performance, e

TEXT: Press and release to displaythe artist and song title. While inTEXT MODE, press again to scrollthrough the Artist (AR), Song (SO), Channel (CH)

WARNING: Exceeding any vehicle weight rating limitation couldresult in serious damage to the vehicle and/or personal injury.Steps for determining the

to transport the cement to your home? If you and your friend eachweigh 220 lb. (99 kg), the calculation would be: 1,400 - (2 x 220) -(12 x 100) = 1,40

FWDGCWR (Gross Combined Weight Rating)/Trailer WeightClass MaximumGCWRTrailer weight Tongue loadClass I towing(standard)6900 lb(3131 kg)2000 lb(907 kg

Preparing to towUse the proper equipment for towing a trailer and make sure it isproperly attached to your vehicle. Contact your authorized dealer or

WARNING: Do not connect a trailer’s hydraulic brake systemdirectly to your vehicle’s brake system. Your vehicle may nothave enough braking power and y

Trailer towing tips• Practice turning, stopping and backing up before starting on a trip toget the feel of the vehicle trailer combination. When turni

All Wheel Drive (AWD) vehicles:Tow your All Wheel Drive vehicle with all four wheels on the ground orwith all four wheels off the ground using a vehic

STARTINGPositions of the ignition1. Off— locks the automatictransmission gearshift lever andallows key removal. This positionalso shuts the engine and

WARNING: Do not park, idle, or drive your vehicle in dry grassor other dry ground cover. The emission system heats up theengine compartment and exhaus

• Make sure the gearshift lever is inP (Park).3. Turn the key to 3 (on) withoutturning the key to 4 (start).Some warning lights will briefly illuminat

titles, the display will read REPLACE SONG? Press OK to access thesaved titles and pressSEEK to cycle through the saved titles.When the song title app

that assists in starting the engine. After releasing the key from the 4(start) position, the engine may continue cranking for up to 10 secondsor until

WARNING: To reduce the risk of electrical shock, do not useyour heater with ungrounded electrical systems or two-pronged(cheater) adapters.Prior to us

How to use the engine block heaterEnsure the receptacle terminals are clean and dry prior to use. To cleanthem, use a dry cloth.Depending on the type

ABS warning lampThe ABS lamp in the instrumentcluster momentarily illuminateswhen the ignition is turned on. Ifthe light does not illuminate duringsta

Push the parking brake pedaldownward again to release theparking brake. Driving with theparking brake on will cause thebrakes to wear out quickly andr

WARNING: If a failure has been detected within theAdvanceTrac威 with RSC威 system, the ⬙sliding car⬙ icon willilluminate steadily. Verify that the Advan

When AdvanceTrac威 with RSC威 performs a normal system self-check,some drivers may notice a slight movement of the brake, and/or arumble, grunting, or g

Electronic Stability Control (ESC)Electronic Stability Control (ESC) may enhance your vehicle’s directionalstability during adverse maneuvers, for exa

The Roll Stability Control system may be deactivated in certainsituations. See the Switching Off AdvanceTrac威 with RSC威 sectionfollowing.Switching Off

STEERINGTo help prevent damage to the power steering system, never hold thesteering wheel at its furthest turning points (until it stops) for more tha

b. CHANGE PIN: Press OK when CHANGE PIN is displayed. Thedisplay will read ENTER OLD PIN. Enter your current (old) PINnumber and when the system accep

If you cannot move the gearshift lever out of P (Park) with ignition inthe on position and the brake pedal depressed:1. Apply the parking brake, turni

Automatic Transmission Adaptive LearningYour transmission is equipped with an adaptive learning strategy found inthe vehicle computer. This feature is

WARNING: Always set the parking brake fully and make surethe gearshift is latched in P (Park). Turn the ignition to the offposition and remove the key

• Provides additional engine braking through the automatic transmissionshift strategy which reacts to vehicle inputs (vehicle acceleration,accelerator

WARNING: To help avoid personal injury, always use cautionwhen in R (Reverse) and when using the RSS.WARNING: This system is not designed to prevent c

The RSS automatically turns on when the gear selector is placed in R(Reverse) and the ignition is on. A control in the message center allowsthe driver

To use the camera system, place thetransmission in R (Reverse); animage will display on the navigationscreen. The area displayed on thescreen may vary

WARNING: The camera system is a reverse aid supplementdevice that still requires the driver to use it in conjunction withthe rear view mirror and the

All components of the AWD system are sealed for life and require nomaintenance.If your vehicle is equipped with AWD, a spare tire of a different sizeo

If your vehicle goes off the edge of the pavement• If your vehicle goes off the edge of the pavement, slow down, butavoid severe brake application, ea

Extra FeaturesAUX: Press repeatedly to cyclethrough LINE (auxiliary audiomode), SYNC (if equipped) and FESmodes (if equipped).For location and further

Emergency maneuvers• In an unavoidable emergency situation where a sudden sharp turnmust be made, remember to avoid “over-driving” your vehicle (i.e.,

When driving through water, determine the depth; avoid water higherthan the bottom of the wheel rims (if possible) and proceed slowly. If theignition

When climbing a steep slope or hill, start in a lower gear rather thandownshifting to a lower gear from a higher gear once the ascent hasstarted. This

Make sure you allow sufficient distance between you and other vehiclesfor stopping. Drive slower than usual and consider using one of the lowergears.

ROADSIDE ASSISTANCEGetting roadside assistanceTo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside

Canadian customers refer to your Customer Information Guidefor information on:• coverage period• exact fuel amounts• towing of your disabled vehicle•

Note: With extended use, the flasher may run down your battery.FUEL PUMP SHUT-OFFIn the event of a moderate to severe collision, this vehicle is equip

Standard fuse amperage rating and colorCOLORFuseratingMinifusesStandardfusesMaxifusesCartridgemaxifusesFuse linkcartridge2A Grey Grey — — —3A Violet V

Passenger compartment fuse panelThe fuse panel is located under the instrument panel to the left of thesteering wheel.The fuses are coded as follows.F

Fuse/RelayLocationFuse AmpRatingProtected Circuits8 10A Low beam headlamps (right)9 15A Interior lights, Cargo lamps10 15A Backlighting, Puddle lamps1

The Auxiliary Input Jack provides away to connect your portable musicplayer to the in-vehicle audiosystem. This allows the audio from aportable music

Fuse/RelayLocationFuse AmpRatingProtected Circuits34 5A Yaw rate sensor, ABS R/S,Refrigerator relay coil35 10A Steering rotation sensor, Rearpark assi

WARNING: To reduce risk of electrical shock, always replacethe cover to the Power Distribution Box before reconnecting thebattery or refilling fluid r

Fuse/RelayLocationFuse AmpRatingProtected Circuits9 40A* Anti-lock Brake System(ABS)/AdvanceTrac pump10 30A* Starter11 30A* Powertrain Control Module

Fuse/RelayLocationFuse AmpRatingProtected Circuits36 10A** Back up lamps37 10A** PCM run/start38 5A** Illumination delayed accessory39 Diode Fuel diod

Auxiliary relay box (if equipped)The relay box is located in the engine compartment next to the powerdistribution box.Fuse/RelaylocationFuse amprating

CHANGING A FLAT TIREIf you get a flat tire while driving:• do not brake heavily.• gradually decrease the vehicle’s speed.• hold the steering wheel fir

Dissimilar spare tire/wheel informationWARNING: Failure to follow these guidelines could result in anincreased risk of loss of vehicle control, injury

3. Full-size dissimilar spare without label on wheelWhen driving with the full-size dissimilar spare tire/wheel, do not:• Exceed 70 mph (113 km/h)• Us

Stopping and securing the vehicle1. Park on a level surface, set theparking brake and activate hazardflashers.2. Place gearshift lever in P (Park)and

Tire change procedureWARNING: When one of the front wheels is off the ground, thetransaxle alone will not prevent the vehicle from moving orslipping o

Customer Assistance 320Reporting safety defects (U.S. only) 326Reporting safety defects (Canada only) 326Cleaning 327Maintenance and Specifications 33

Troubleshooting:1. Do not connect the audio input jack to a line level output. Line leveloutputs are intended for connection to a home stereo and are

3. Put the jack in the jack notchnext to the tire you are changing.Turn the jack handle clockwise untilthe wheel is completely off theground.4. Remove

Stowing the tire and jack1. Fully collapse the jack, fold thelug wrench socket into the handleand place the jack and wrench intothe felt bag as shown.

If you are stowing the flat tire,remove the L-shaped bolt from fromthe external pocket of the felt bag.With the 3rd row seat in the raisedposition, st

1. Air compressor (inside)2. Diverter knob3. On/Off switch4. Air pressure gauge5. Sealant bottle/canister6. Sealant filling clear tube7. Sealant tube

General informationWARNING: Failure to follow these guidelines could result in anincreased risk of loss of vehicle control, injury or death.Do not att

• Never leave the temporary mobility kit unattended when it isoperating.• Sealant compound contains latex. Make sure that you use thenon-latex gloves

Do not remove any foreign object that has pierced the tire. If a punctureis located in the tire sidewall, stop and call roadside assistance.1. Remove

8. Inflate the tire to the pressurelisted on the tire label located onthe driver’s door or the door jamarea.Note: When the sealing compound is first a

Second stage: Checking tire pressureCheck the air pressure of your tires as follows:1. Remove the valve cap from the tire valve.2. Unhook the black ho

Note: After the sealing compound has been used, the maximum vehiclespeed is 50 mph (80 km/h) and the maximum driving distance is120 miles (200 km). Th

Your vehicle may be equipped with aUSB port inside your center console.This feature allows you to plug inmedia playing devices, memorysticks, and also

3. Using the yellow cap tool, pressthe tab located on the temporarymobility kit compressor housingwhile pulling up on the sealantcanister.Installation

2. Once aligned, seat the sealantcanister by lightly pushing downuntil you hear an audible click.3. Wrap the clear tube around thecompressor housing.N

Bolt size Wheel lug nut torque*lb.ft. N•m1/2-20 UNF 100 135* Torque specifications are for nut and bolt threads free of dirt andrust. Use only Ford re

WARNING: Do not insert the nozzle of portable fuel containersor aftermarket funnels into the Easy Fuel™ system. This coulddamage the fuel system and i

Connecting the jumper cables1. Connect the positive (+) jumper cable to the positive (+) terminal ofthe discharged battery.Note: In the illustrations,

3. Connect the negative (-) cable to the negative (-) terminal of theassisting battery.4. Make the final connection of the negative (-) cable to an ex

3. Once the disabled vehicle has been started, run both engines for anadditional three minutes before disconnecting the jumper cables.Removing the jum

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of

WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y

If the vehicle is towed by other means or incorrectly, vehicledamage may occur.Ford Motor Company produces a towing manual for all authorized towtruck

CD/CD player careDo:• Handle discs by their edges only.(Never touch the playingsurface).• Inspect discs before playing.• Clean only with an approved C

GETTING THE SERVICES YOU NEEDWarranty repairs to your vehicle must be performed by an authorizedFord, Lincoln, or Mercury dealer. While any authorized

In Canada:Mailing Address (Ford vehicles)Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4Teleph

In the United States, a warranty dispute must be submitted to the BBBAUTO LINE before taking action under the Magnuson-Moss WarrantyAct, or to the ext

THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM(U.S. ONLY)Your satisfaction is important to Ford Motor Company and to your dealer.If a warranty con

authorized dealer to resolve a factory-related vehicle service concernhave been unsatisfactory, Ford of Canada participates in an impartialthird party

GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADABefore exporting your vehicle to a foreign country, contact theappropriate foreign embassy or consulate.

Monday-Friday 8:00 a.m. - 6:00 p.m. ESTHelm, Incorporated can also be reached by their website:www.helminc.com.(Items in this catalog may be purchased

WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3-A), which is

WAXING• Wash the vehicle first.• Do not use waxes that contain abrasives; use Motorcraft PremiumLiquid Wax (ZC-53-A), which is available from your aut

ENGINEEngines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal. When washing:• Take care when

CDs with homemade paper(adhesive) labels should not beinserted into the CD player asthe label may peel and cause theCD to become jammed. It isrecommen

PLASTIC (NON-PAINTED) EXTERIOR PARTSUse only approved products to clean plastic parts. These products areavailable from your authorized dealer.• For r

INSTRUMENT PANEL/INTERIOR TRIM AND CLUSTER LENSClean the instrument panel, interior trim areas and cluster lens with aclean and damp white cotton clot

• If grease or tar is present on the material, spot-clean the area firstwith Motorcraft Spot and Stain Remover (ZC-14). In Canada, useMotorcraft Multi

FORD AND LINCOLN MERCURY CAR CARE PRODUCTSYour Ford or Lincoln Mercury authorized dealer has many qualityproducts available to clean your vehicle and

SERVICE RECOMMENDATIONSTo help you service your vehicle, we provide scheduled maintenanceinformation which makes tracking routine service easy.If your

OPENING THE HOOD1. Inside the vehicle, pull the hoodrelease handle located under thebottom of the instrument panel nearthe steering column.2. Go to th

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT1. Power steering fluid reservoir2. Engine coolant reservoir3. Brake fluid reservoir4. Battery5. Power

WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer

Poor wiper quality can be improved by cleaning the wiper blades and thewindshield. Refer to Windows and wiper blades in the Cleaningchapter.To prolong

3. Set the parking brake and ensure the gearshift is securely latched in P(Park).4. Open the hood. Protect yourself from engine heat.5. Locate and car

Sample MP3 structureIf you are burning your own MP3discs, it is important to understandhow the system will read thestructures you create. While variou

• Do not overfill the enginewith oil. Oil levels above thismark may cause enginedamage. If the engine isoverfilled, some oil must beremoved from the e

to the current engine and emission system protection standards and fueleconomy requirements of the International Lubricant Standardization andApproval

If you see any corrosion on the battery or terminals, remove the cablesfrom the terminals and clean with a wire brush. You can neutralize theacid with

1. With the vehicle at a complete stop, set the parking brake.2. Put the gearshift in P (Park), turn off all accessories and start theengine.3. Run th

FILL RANGE” in the coolant reservoir. If the level falls below, addcoolant per the instructions in the Adding engine coolant section.Your vehicle was

WARNING: Do not add engine coolant when the engine is hot.Steam and scalding liquids released from a hot cooling systemcan burn you badly. Also, you c

coolant degas system with a pressurized cap, or if it is necessary toremove the coolant pressure relief cap on the radiator of a vehicle withan overfl

Recycled engine coolantFord Motor Company does NOT recommend the use of recycled enginecoolant in vehicles originally equipped with Motorcraft Premium

• Refer to the chart on the coolant container to ensure thecoolant concentration in your vehicle will provide adequateprotection at the temperatures i

1. Pull off the road as soon as safely possible and turn off the engine.2. Arrange for the vehicle to be taken to a service facility.3. If this is not

• Terrain: Hills, mountains, tall buildings, bridges, tunnels, freewayoverpasses, parking garages, dense tree foliage and thunderstorms caninterfere w

• Extinguish all smoking materialsand any open flames beforerefueling your vehicle.• Always turn off the vehicle beforerefueling.• Automotive fuels ca

RefuelingWARNING: Fuel vapor burns violently and a fuel fire can causesevere injuries. To help avoid injuries to you and others:• Read and follow all

Note: A fuel spillage concern may occur if overfilling the fuel tank. Donot overfill the tank to the point that the fuel is able to bypass the fuelfil

Your vehicle was not designed to use fuel or fuel additives with metalliccompounds, including manganese-based additives.Note: Use of any fuel other th

Cleaner airFord endorses the use of reformulated “cleaner-burning” gasolines toimprove air quality, per the recommendations in the Choosing the rightf

1. After lifting the carpeted floorpanel, locate the white plasticfunnel. It is attached to the rear,lower edge of the spare tirecompartment.2. Slowly

The advertised capacity is the amount of the indicated capacity and theempty reserve combined. Indicated capacity is the difference in theamount of fu

Keep a record for at least one month and record the type of driving (cityor highway). This will provide an accurate estimate of the vehicle’s fuelecon

• Perform all regularly scheduled maintenance items. Follow therecommended maintenance schedule and owner maintenance checksfound in scheduled mainten

• Have the items listed in scheduled maintenance informationperformed according to the specified schedule.The scheduled maintenance items listed in sc

Radio Display Condition Action RequiredACQUIRING Radio requires morethan two seconds toproduce audio for theselected channel.No action required.This m

government emission standards. The OBD-II system also assists yourauthorized dealer in properly servicing your vehicle. When the Serviceengine soonind

indicate that the vehicle is not ready for I/M testing. To determine if thevehicle is ready for I/M testing, turn the ignition key to the on positionf

BRAKE FLUIDThe fluid level will drop slowly asthe brakes wear, and will rise whenthe brake components are replaced.Fluid levels between the “MIN” and“

7. Remove the dipstick and inspect the fluid level. The fluid should be inthe designated areas for normal operating temperature.Low fluid levelDo not

If an overfill occurs, excess fluidshould be removed by an authorizeddealer.An overfill condition oftransmission fluid may cause shift and/or engageme

6. Replace the air filter housingcover and secure the clamps. Besure that the air cleaner cover tabsare engaged into the slots of the aircleaner housi

MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIESItems CapacityFord Part Name orequivalentFord Part Number /Ford SpecificationBrake fluidBetween MAX a

Items CapacityFord Part Name orequivalentFord Part Number /Ford SpecificationEngine oil 5.5 quarts (5.2L)Motorcraft SAE 5W-20Premium SyntheticBlend Mo

ENGINE DATAEngine 3.5L DOHC V6 engineDisplacement 3.5LRequired fuel 87 octaneFiring order 1–4–2–5–3–6Spark plug gap 0.052–0.056 inch (1.32–1.42 mm)Ign

IDENTIFYING YOUR VEHICLESafety Compliance Certification LabelThe National Highway Traffic SafetyAdministration Regulations requirethat a Safety Compli

Radio Display Condition Action RequiredNO TEXT Song title informationnot available.Song title informationnot available at thistime on this channel.The

The Vehicle Identification Number (VIN) contains the followinginformation:1. World manufacturer identifier2. Brake system / Gross VehicleWeight Rating

GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local Ford or Ford of

• To avoid interference with other vehicle functions, such as anti-lockbraking systems, amateur radio users who install radios and antennasonto their

AAccessory delay ...104AdvanceTrac ...264Air cleaner filter ...364–365Air conditioning ...

Cleaning your vehicleengine compartment ...329instrument panel ...331interior ...331plas

change oil soon warning,message center ...338checking and adding ...338dipstick ...338

lighting up panel andinterior ...83JJump-starting your vehicle ...313KKeyless entry systemautolock ...

Power door locks ...134Power liftgate ...126Power mirrors ...105Power point ...

Spare tire(see Changing the Tire) ...298Spark plugs,specifications ...365, 368Specification chart,lubricants ...

Your vehicle may be equipped with a Family Entertainment System(FES) which allows you to listen to audio CDs, MP3 discs, watch DVDsand to plug in and

Press the power button to turn thesystem off. The indicator light willturn off indicating the system is off.Note: The audio from the DVD system will p

CONGRATULATIONSCongratulations on acquiring your new Ford Motor Company product.Please take the time to get well acquainted with your vehicle by readi

3. The disc will begin to play andthe ‘MP3 Audio Disc’ screen willdisplay and allow you to access theCOMPRESSION, SHUFFLE, SCANand FOLDER MODE feature

from the auxiliary source, the screen will remain black. If the videosource is set to DVD-AUX, the display will automatically turn on if avideo signal

1. Press theheadphone/speaker/ buttonon the DVD player or press the 2and 4 memory presets on the radio at the same time.A green light will illuminate

To adjust display brightness:To decrease/increase the brightnesslevel on the display screen, pressthe brightness control on the DVDsystem. A display w

Note: Headphone A can access any possible media (AM, FM1, FM2, SAT(if equipped), CD, DVD, DVD-AUX). Headphone B can only access DVDand DVD-AUX.For fur

8. Infrared (IR) Receiver & Transmitter: System sensor which readsthe signals from the remote control and sends audio signals to theinfrared (IR)

14. MENU: When playing a DVD,press MENU once to enter the DVDdisc menu (if available) and presstwice to enter the system set-up menu. From the set-up

1. Power control: Press to turn the FES (Family EntertainmentSystem) ON/OFF.2. Cursor controls: Use in various active menus to advance the cursorup/do

8. Fast Forward/Next: In DVD mode, press and hold for a quickadvance within the DVD. Press and release to advance to the nextchapter. In CD/MP3 mode,

Battery replacementBatteries are supplied with the remote control unit. Since all batterieshave a limited shelf life, replace them when the unit fails

Protecting the environmentWe must all play our part inprotecting the environment. Correctvehicle usage and the authorizeddisposal of waste, cleaning a

Additional infrared wireless headphones may be purchased for use withthe system. Also, wired headphones may be purchased and plugged inwhere indicated

Headphone storageTwist the earphones as shown tofold them flat for compact storage.Wired headphonesWARNING: Do not leave children unattended in the ve

Adjust the headphone volume usingthe volume control on the DVDsystem.OperationSingle play/Dual playYour DVD and audio system work together with the in

The headphone control will now be active and a green light next to theA or B headphone control buttons will illuminate. The system can outputtwo diffe

The headphone control will now be active and a green light next to theA or B headphone control buttons will illuminate. The system can outputtwo diffe

Menu modePress MENU once on the DVD system to access the DVD disc menu ifavailable.Press MENU twice to access the DVD set-up menu and the followingfea

You can select from: WIDE, LETTERBOX or PAN SCAN. Once you havemade your selection, press ENTERto confirm. The LCD screen displaywill immediately chan

Once you have made your selection,press ENTER to confirm. This isdisc dependent.Audio CDsTo play audio CDs on your DVD system:1. Ensure that the vehic

4. The folder, track and elapsedtime will appear in the status bar.The screen will list the Artist, Title,Album and File Name.COMP (Compression):Compr

CD, MP3 and CD player care• Handle discs by their edges only. Never touch the playing surface.• Do not expose discs to direct sunlight or heat sources

SPECIAL NOTICESNew Vehicle Limited WarrantyFor a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited

Playing a DVD1. Ensure that the vehicle is on or the ignition is in accessory mode.2. Ensure that the navigation system is on.3. Insert a DVD label-si

Frame by frame1. With a DVD playing, press pause.2. Press the right cursor button. TheDVD will advance one frame. Eachpress of the right cursor button

Audio displaysYour DVD system interacts closely with the front audio system. Statusmessages will appear in the radio display showing the DVD status. S

When the DVD system is ON, youcan then press the memory presetcontrols 2 and 4 simultaneously totoggle between Single Play and Dual Play. In Single Pl

Safety informationWARNING: Driving while distracted can result in loss of vehiclecontrol, accident and injury. Ford strongly recommends thatdrivers us

Do not operate video games or video equipment if the power cordsand/or cables are broken, split or damaged. Carefully place cords and/orcables where t

Temperature extremesWhen the vehicle is parked under direct sunlight or in an extremely coldplace for a long period of time, wait until the cabin temp

Compatibility with aftermarket audio systems(headphone only mode)When the Family Entertainment System (FES) detects that the originalradio supplied by

SINGLE ZONE CLIMATE CONTROL WITH REAR PASSENGERCOMPARTMENT CLIMATE CONTROL1.Defrost: Distributes outside air through the windshield defrostervents and

• : Distributes air through the floor vents and rear seat floor vents.4. A/C: Press to activate/deactivate air conditioning. Use withrecirculated air

Event Data RecordingOther modules in your vehicle — event data recorders — are capable ofcollecting and storing data during a crash or near crash even

Operating tips• To reduce fog build up on the windshield during humid weather, placethe air flow selector in theposition.• To reduce humidity build up

DUAL ZONE AUTOMATIC TEMPERATURE CONTROL WITHHEATED SEATS AND REAR PASSENGER COMPARTMENTCLIMATE CONTROL (IF EQUIPPED)Temperature conversion: To switch

• : Distributes air through the instrument panel vents.•: Distributes air through the instrument panel vents, floor ventsand rear seat floor vents.•:

10. Power/Cabin temperature: Press to activate/deactivate theclimate control system. When the system is off, outside air is preventedfrom entering the

DUAL ZONE AUTOMATIC TEMPERATURE CONTROL(NAVIGATION BASED–IF EQUIPPED)Temperature conversion: To switch between Fahrenheit and Celsius,refer to Message

5. Passenger heated seat (if equipped): Press to control thepassenger heated seat. Refer to Heated seats in the Seating and SafetyRestraints chapter f

TOUCHSCREEN FUNCTIONSTemperature conversion: To switch between Fahrenheit and Celsius,refer to Message center in the Driver Controls chapter.Front Zon

Max A/C– Distributes recirculated air through the instrument panelvents to cool the vehicle. This re-cooling of the interior air is moreeconomical and

Operating tips• To reduce fog build up on the windshield during humid weather, placethe air flow selector in theposition.• To reduce humidity build up

AUXILIARY CLIMATE CONTROL1.Fan speed: Turn to select the desired fan speed.2.: Distributes air through the rear vents.3.: Distributes air through the

Cell phone useThe use of Mobile Communications Equipment has become increasinglyimportant in the conduct of business and personal affairs. However,dri

REAR WINDOW DEFROSTERRThe rear defroster control is located on the climate control panel andworks to clear the rear window of fog and thin ice.The ign

HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the low beam headlampso

3. Turn the ignition switch to on and then back to off.4. Turn the headlamp control to the autolamp position. The headlampswill turn on.5. Wait the de

Daytime running lamps (DRL) (if equipped)Turns the headlamps on with a reduced output.To activate:• the ignition must be in the on position,• the head

• (1) 8 feet (2.4 meters)• (2) Center height of lamp toground• (3) 25 feet (7.6 meters)• (4) Horizontal reference line2. Measure the height of thehead

Halogen headlamp5. Locate the vertical adjuster on each headlamp. Using a Phillips #2screwdriver, turn the adjuster either clockwise (to adjust down)

INTERIOR LAMPSDome lamps and map lampsThe map lamps are located on theoverhead console. Press the controlson either side of each map lamp toturn on th

Note: The ambient lights will stay on until after the ignition is placed inthe off position and either of the front doors are opened or the accessoryd

Function Number of bulbsTradenumberFront park/turn lamp 2 3157NA*Front sidemarker lamp N/A LEDHeadlamp2 9008 H132D3 HID(optional)*Tail/brake/turn sign

3. Locate the high beam/low beamheadlamp bulb electrical connectorand remove it by squeezing thelocking tab and pulling it straightout.4. Remove the b

Export unique (Non–United States/Canada) vehicle specificinformationFor your particular global region, your vehicle may be equipped withfeatures and o

Replacing rear stop/park/turn/backup and side marker lamp bulbs(non LED)The stop/tail/turn/backup and side marker lamp bulbs are located in thetail la

Replacing fog lamp bulbs (if equipped)1. Make sure the fog lamp switch isin the off position.2. From underneath the vehicle,partially remove the tire

MULTI-FUNCTION LEVERWindshield wiper: Rotate the endof the control away from you toincrease the speed of the wipers;rotate towards you to decrease the

Rear window wiper/washer controlsFor rear wiper operation, rotate therear window wiper and washercontrol to the desired position.Select:2 — Normal spe

ILLUMINATED VISOR MIRROR (IF EQUIPPED)Lift the mirror cover to turn on thevisor mirror lamp.Slide on rod featureThe visor will slide back and forthon

OVERHEAD CONSOLEThe appearance of your vehicle’s overhead console will vary according toyour option package.Storage compartmentThe storage compartment

Compass zone adjustment1. Determine which magnetic zoneyou are in for your geographiclocation by referring to the zonemap.2. Turn ignition to the on p

2. To calibrate, press and hold the 7and 9 radio preset buttons togetherfor approximately 10 seconds untilCAL appears. Release the buttons.3. Slowly d

Second row center console features (if equipped)The second row center consoleincorporates the following features:• Flip forward armrest to provide afl

Refrigerator: Press the COOL sideof the control and the indicator lighton the cool side of the switch willglow when the refrigerator is active.When in