Ford 2005 F-150 v.4 Manual do Utilizador descarregar pdf (Página 82)

To extend the bed extender:

1. Lower tailgate.

2. Pull the round knobs on each side

of the extender to release it from

the pickup box.

3. Pivot extender on to the tailgate.

4. Evenly push down on the

extender and push the round knobs

in on each side locking it in place.

Green markings on the shaft

indicate the locked position. The

locking clip screws below the middle

bar can be tightened

counterclockwise for extra security.

Note: If the red marking on the

shaft is visible, the bed extender

is not locked or properly secured.

To stow the bed extender, follow Steps 1 through 4 in reverse order.

The bed extender may be used to secure a load of up to 100 lb. (46 kg)

on the tailgate.

The bed extender should always be kept in the stowed position

with the tailgate closed when not in use.

When driving the vehicle off road, the bed extender should be in

the stowed position and the tailgate closed.

To remove the bed extender:

1. Extend the bed extender.

2. Pull the round knobs on each side

of the extender to unlock it.

Make sure the locking clip screws are

loose before removing the extender.

3. Press the locking clips below the

middle bar on each side and lift the

extender out of the bed.

Note: Remove and store the bed extender when not in use.

To install the bed extender, follow the removal procedure in reverse order.

2005 F-150 (f12)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 311 312

Sem comentários

Ford 2005 F-150 v.4 Manual do Utilizador Página 82